Chapter 6: Other Functions; Live Tv Pause; Pvr (Personal Video Recorder); Magiconnect - TCL P745 Series Operation Manual

Chapter 6

Live TV Pause

(* Available according to the software version)
Allows you to pause, fast forward and rewind live TV,
so you don't have to miss any part of your favourite
programs. Before you use the function, connect a
USB drive to the TV first. For the first time, you should
complete the disk setup for the USB drive.
Press on the remote control, select
Channels & Inputs > Channels > Live TV Pause,
then press OK to turn it on. Then exit to TV mode, press
to display Quick Settings panel, use Left/Right to
select Live TV Pause, and press OK to enter.
1. Follow the directions on the screen to do the disk
setup if you use Live TV Pause for the first time.
2. After the disk setup is done, Live TV Pause will
start, and the Live TV Pause menu displays on the
screen.
3. When the Live TV Pause menu disappears and
only the timing of the Live TV Pause remains on
the screen, you can press OK to call out the Live
TV Pause menu and operate according to the on-
screen prompt.
4. Press button to stop the Live TV Pause and exit.
Notes:
- This feature is available only for digital channels.
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for Live TV
Pause, the bigger the recording length.

PVR (Personal Video Recorder)

(* Available according to the software version)
Allows you to record your favourite TV programs. Before
you use the function, connect a USB drive to the TV
first.
Note: The feature is available only in selected products
and, due to specific TV network limitations and country
technical requirements, might not be available in
product or place of installation. Feature might also be
blocked by TV network due to copyright protection (HD
content, recording protection).
1. Press on the remote control
> Channels & Inputs > Channels > PVR.
2. Press OK/Right to enter and select Record. It starts
to record automatically.
3. Press blue button to access Settings and use Up/
Down/Left/Right to adjust the recording duration.
4. Press OK or
to stop recording manually,
the recorded file will be saved. In normal
operation, the recording will stop automatically
when the recording duration expires.
5. In recording, the PVR mini panel will also show on
6. To watch the recorded program, exit PVR mode first.
(Settings) >
Notes:

MagiConnect

MagiConnect, formerly named T-Cast, lets you enjoy
plenty of videos, rich of applications, and share great
contents on large screen. It also allows you to turn a
smart device into a sophisticated remote control, provid-
ing more features than your normal TV remote control.
You can then control your TV through your smart
device.
Follow the on-screen instructions to scan the QR code
on the TV screen and download MagiConnect.
Note: Make sure the smart device and your TV are
, select (Settings)
Other Functions
Note: To access the blue button or , you need to
press button on the remote control to display the
virtual remote control keyboard first.
the screen to indicate the recording progress.
on the remote control
Press
> Channels & Inputs > Channels > PVR > PVR
List, then select the related record file. Press OK
to play. (It is the same if you record a digital radio
program.)
- This feature is available only for digital non encrypted
channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive
to avoid the loss of your important data due to
unforeseen malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source
during recording, store the recording data before
changing the channel or source.
- The TV cannot play files normally if the parameters
of the file exceed the limitations of the system, the
file format is not supported, the file is damaged, or
the file cannot be decoded.
- Do not disconnect the USB drive when the system
is reading a file or transmitting data, otherwise the
system or the drive may be damaged.
in the same home LAN (local area network) or
network segment to use TV remote function.
6
(Settings)
, select