Heath Zenith 7762 Manual page 3

Figure 7
Inside Push Button
CHIME
VOLUME
TUNE:
HOLD 1 SEC
SYNC:
HOLD 3 SEC
RESET:
HOLD 10 SEC
Inside Chime
Tune Setting Table
Tune
Ding
Ding-Dong or
Westminster
Helpful Videos – www.hzsupport.com
8. Snap chime cover onto chime base. Align
top edge of case with top of back plate. Rotate
bottom of case toward back plate and snap
into position (see Figure 7).
Tune Settings
The chime has different selectable tunes: Ding
(one note tune), Ding-Dong (two note tune), or
Westminster (eight note tune). The factory set-
ting is for the Westminster tune. This tune can
be changed by following the instructions in the
Tune Setting Table.
Note: All chime models are designed to work with
up to 5 push buttons (sold separately). All chimes
are designed to play only two different tunes no
matter how many push buttons are used.
Push Button
Jumper - ON
Jumper - OFF
Chime
———
Press button on chime. Listen
for single "Beep" tone. Release
button. Listen for selected tune.
Repeat to select different tune.
Helpful Answers – 1-800-858-8501
3