Getting To Know Your Appliance; The Control Panel; The Hotplates; Residual Heat Indicator - Junker JR36ET54 Instruction Manual

*Getting to know your
appliance
T he instruction manual is the same for various different
G e t t i n g t o k n o w y o u r a p p l i a n c e
hobs. You can find the hob dimensions in the overview
of models. ~ Page 2

The control panel

Displays
Heat settings
‚ - Š
Residual heat
• / œ
PowerBoost function
›
Timer
‰‰
Controls
Primary switch
#
Wipe protection/child safety lock
Î
PowerBoost function
h
Hotplate selection
g
Control panel
A@
Automatic zone control
ð
Timer
0
Notes
When you touch a symbol, the respective function is
■
activated.
Always keep the controls dry. Moisture reduces their
■
effectiveness.
Do not pull pans close to the displays and sensors.
■
The electronics could overheat.

The hotplates

Hotplate Activating and deactivating
Single-circuit hot-
$
plate
Dual-circuit hot-
ð Select the hotplate and touch the
plate
bol
When the hotplate is activated, the corresponding display lights up
Notes
Any dark areas in the glow pattern of the hotplate
■
are due to technical reasons. The function of the
hotplate is not affected.
Hotplate temperature is regulated by the heat
■
switching on and off.The heat may also switch on
and off at the highest setting.
This ensures e.g.:
– sensitive components are protected from
overheating
– the appliance is protected from electrical
overload
– better cooking results are achieved
With multi-circuit hotplates the heater elements of the
■
inner filament circuits and the heater element of the
activations may switch on and off at different times.

Residual heat indicator

The hob has a two-stage residual heat indicator for
each hotplate.
If appears in the display the hob is still hot. It may be
•
used, for example, to keep a small meal warm or to
melt cooking chocolate. As the hotplate cools down
further, the display changes to
until the hotplate has cooled sufficiently.
ð sym-

Getting to know your appliance

. The display remains lit
œ
en
27