Table of Contents
Advertisement
► Re-enter the new PIN to confirm.
When the following appears:
•
PIN/PUK do not match = You have confirmed the PIN incorrectly. You will be
requested to re-enter the new PIN and reconfirm.
Please wait a few seconds after confirming the new PIN: SystemLock is being installed.
The following message will be displayed if installation is successful:
Setup Notice
Changes have been saved
[Continue]
► Now press the Enter key. The SystemLock administration menu will be displayed:
Security
SmartCard SystemLock
SmartCard SystemLock
Uninstall:
BIOS Recovery:
SmartCard and Pin
SmartCard Initialization
Admin SmartCard
SuperUser SmartCard:
User SmartCard:
Service SmartCard:
SmartCard Configuration
Change PIN:
Change PUK:
Unblock SmartCard:
► For security reasons, the preset PUK should always be changed before removing
the new SmartCard. To do this, under SmartCard Configuration, select the option
Change PUK, press the Enter key and input the new PUK.
► First enter the preset PUK.
Enter the PUK:
New SmartCards have a preset PUK (see above).
You will need to know the PUK assigned to the SmartCard if you want to
re-initialise a previously initialised SmartCard.
Fujitsu
Installed
[Enter]
[Allowed]
[Always required]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
[Enter]
Security functions
Item Specific Help
Allows to deactivate
The smartcard security.
ATTENTION:
Always check the BIOS
password settings after
uninstalling
SystemLock.
NOTICE:
Reinstalling a SinglePC
implies re-initializing
all of your smartcards
71
Advertisement
Table of Contents
