Honda CLARITY Plug-In Hybrid 2020 Owner's Manual page 537

■
Inflating an Under-inflated Tire
You can use the kit to inflate a non-punctured under-inflated tire.
Sealant/Air Hose
Valve Cap
Sealant/Air Hose
Valve Stem
1. Open the trunk floor lid.
2 Getting Ready to Temporarily Repair
the Flat Tire P. 527
2. Remove the kit from the case.
3. Place the kit, face up, on flat ground near
the flat tire, away from traffic. Do not
place the kit on its side.
4. Remove the air only hose from the kit.
5. Remove the valve cap.
6. Attach the sealant/air hose onto the tire
valve stem. Screw it until it is tight.
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
1Inflating an Under-inflated Tire
NOTICE
Do not operate the temporary tire repair kit
compressor for more than 15 minutes. The
compressor can overheat and become permanently
damaged.
Continued 535