Honda CLARITY Plug-In Hybrid 2020 Owner's Manual page 469

■
What to do when you cannot start charging
If charging does not start, even if the POWER indicator comes on, and the charging
connector is plugged in, perform one of the following solutions.
Cause
The timer has been set, but the start time is in
the future.
The 12-volt battery is weak.
The power mode is ON.
The charging connector is not properly
attached to the vehicle's inlet.
Start charging using the smart entry remote.
Press and hold the charge lid release button on the smart entry remote.
The charge indicator on the charge lid comes on when charging starts.
u
Change the customized setting of the charge timer to OFF using the driver
information interface.
u The timer setting will be canceled.
2 Using a Timer P. 471
Check the 12-volt battery condition. If necessary, charge the battery.
Set the power mode to ACCESSORY or VEHICLE OFF (LOCK).
Disengage the connector from the inlet.
Align and insert the connector into the inlet until you hear a click.
uuCharginguControl Box
Solution
Continued 467