Controlling Your Components - RCA WKB10SA1 User Manual

controlling your components

Using the keyboard to Control
Components
Once the keyboard has been programmed successfully, you are
ready to use it to control your components.
To operate the component:
1. Press the key corresponding to the component (TV, ALT + TV for
VCR, SAT, or ALT + SAT for an auxiliary componenet) to set the
keyboard to control the component.
2. Press ON•OFF to turn the component on or off.
3. Use the keys on the keyboard that apply to that component.
Modes of Operation
Because this keyboard can control several different components
(satellite receiver, VCR, cable box, etc.) it uses operational modes
triggered by the component keys. For example, if you want the
keyboard to control the TV, you would press the TV key to put the
keyboard into TV mode. If you want to control the VCR, you would
press the ALT and TV keys simultaneously.
11