Page 1
Wireless Infrared (IR) Keyboard Models: WKB10SA1 WKB10SB1 Please read these instructions before operating this product for the first time. TOCOM 15712700 User’s Guide...
2. Object and Liquid Entry Never push objects of any kind into the keyboard, as these objects may touch dangerous voltage points or short out parts that could result in a electrical shock. Never spill liquid of any kind on the keyboard.
(–) marks inside the battery case. 3. Replace the battery compartment door. Pointing & Operating Range The keyboard works on line of sight, so if there are any obstructions between the keyboard and the TV or receiver, it will seem...
TV or VCR. To control the TV, press this key by itself. To control the VCR, press the ALT key and the TV key at the same time. Most RCA, GE and ProScan TVs will not require programming. Check to see if your TV responds from the keyboard before you begin programming.
Page 5
MUTE When the keyboard is programmed, this button reduces the volume of the active component (TV or RCA audio device) to its minimum level. Press again to restore the volume. PAGE UP / PAGE DOWN Scrolls up and down through guide content one page at a time.
These keys function the same as on a computer keyboard. VOL- / VOL+ When the keyboard is programmed, these keys adjust the audio volume of the TV or RCA audio device. WHO•INPUT In SAT mode, press the WHO•INPUT button one or more times to toggle through your user profiles.
Programming your keyboard Programming the keyboard to control other components This keyboard is already programmed to control most RCA, GE and Proscan TVs, VCRs and cable boxes. The keyboard needs to be programmed to control other manufacturers’ brands. Testing the keyboard...
MOVIE TIME ... 5022 NSC ... 5022 OAK ... 5002, 5023, 5009 PANASONIC ... 5003 Audio code list For some RCA and Dimensia Products Only AM/FM ... 4003 Aux ... 4004 Phono ... 4005 CD ... 4007 Tape ... 4006 PHILIPS ...
(satellite receiver, VCR, cable box, etc.) it uses operational modes triggered by the component keys. For example, if you want the keyboard to control the TV, you would press the TV key to put the keyboard into TV mode. If you want to control the VCR, you would...
Maybe something is between the keyboard and the infrared sensor. • Maybe the keyboard is not in the correct mode to control the component you want to control. Use the following table as a guide: If you want to control...