Table of Contents
Advertisement
Watercraft operation
and the engine will respond normally to the
throttle operation.
1 Cruise assist up switch
2 Cruise assist down switch
3 "SET" switch
TIP:
Once the cruise assist is activated, the set
engine speed can be increased by pushing
the cruise assist up switch or decreased by
pushing the cruise assist down switch. Each
time a switch is pushed, the beeper will
38
sound one time quickly and the set engine
speed will change. However, the adjustment
is limited to a maximum of five increments
above or below the initial cruise assist set-
ting.
1
To deactivate the cruise assist:
Relax your grip on the throttle lever. The
2
beeper sounds two times quickly and the di-
gital speedometer display stops blinking
when the cruise assist is deactivated.
3
TIP:
The cruise assist is also deactivated when the
engine is stopped.
Advertisement
Table of Contents
