Advertisement
HOW TO USE
Before use, check humidifier for leaks and visible damage that may have
occurred during shipping. DO NOT USE if there is evidence of damage.
WARNING - Take care to not pinch your fingers or hand when replacing water
tank into unit.
FILLING WATER TANK
1. Unplug humidifier from electrical outlet.
Note: Spills can occur during cleaning, moving or refilling water tank, so be
careful to avoid spills.
2. Remove water tank by grasping integrated carry handle and pulling up.
3. Unscrew cap from bottom of tank and fill with cool tap water where fill icon is
indicated
. Replace cap.
Note: Do not pour water through the top Air Outlet on the water tank
TIP: If you have hard water or water with excessive minerals, we recommend
using distilled water to help reduce white dust and mineral buildup.
4. Plug adapter into humidifer base, and return tank securely to base in nested
position.
5. Plug in humidifier to approved power source.
Note: Any additives, such as aroma fragrances should not be used in the water
tank or base. These additives can cause cracks in the plastic of the humidifier
and may affect performance. Any use of such additives voids the manufacturer's
warranty.
12 English
.
Advertisement
Need help?
Do you have a question about the VOTIV 7 and is the answer not in the manual?
Questions and answers
The mist kinds of spills out and wets the top of the unit pls advise
The mist from the Sharper Image VOTIV 7 may be spilling out and wetting the top of the unit because the airflow is blocked. Removing any obstruction should resolve the issue.
This answer is automatically generated