Table of Contents
Advertisement
3 Load drives in the drive trays.
• For 3.5" drives: Remove the fastening panels from the sides of the drive tray. Place the drive in the drive
tray. Then insert the fastening panels to secure the drive in place.
• For 2.5" drives: Remove the fastening panels from the sides of the drive tray and store them in a safe
place. Place the drive in the area of the drive tray indicated by a blue rectangle below. Turn the tray upside
down and tighten the screws to secure the drive in place.
4 Insert the loaded hard drive tray into the empty hard drive bay and push it into position by the upper half of the
handle.
Note:
Make sure that the drive tray is completely inserted. Otherwise, the drive might not function properly.
12 Chapter 2: Hardware Setup
DS2 422 +
Advertisement
Table of Contents
