Table of Contents
Advertisement
This function is available for all cooking zones,
provided the other cooking zone on the same side is
not in use. Otherwise, and flash on the display for
the selected cooking zone.
matically.
14.1 Recommended applications
¡ Do not place a lid on the pan.
¡ Never leave pans unattended when they are heating
up.
¡ Only use cold pans.
¡ Use pans with a completely flat base. Do not use
pans with a thin base.
15 Keep-warm function
You can use this function to melt chocolate or butter,
and to keep meals warm.
You can activate the function via Home Connect or Fa-
vourite button.
15.1 Switching on Keep-warm function
Requirement: Assign the function to
→ "Favourite button", Page 10.
Select the required cooking zone.
1.
16 Transfer settings
You can use this function to transfer the power level
and the programmed cooking time from one cooking
zone to another.
16.1 Transfer settings
Requirement: Move the cookware to a cooking zone
which is not switched on, which you have not yet pre-
set or on which no other cookware has been previously
placed.
1
Available depending on software version. Further information on availability can be found on the website.
then switches on auto-
1
.
14.2 Switching on PanBoost
Requirement: Assign the function to
→ "Favourite button", Page 10.
1.
Select the cooking zone.
Touch
.
2.
lights up.
a
a The function is activated.
Note: You can also switch on this function when cook-
ing with a connected FlexZone.
14.3 Switching off PanBoost
Select the cooking zone.
1.
Select the power level.
2.
goes out
a
a The function is switched off.
Note: To avoid high temperatures, this function auto-
matically switches itself off after 30 seconds.
Touch
.
2.
lights up.
a The function is switched on.
15.2 Switching off Keep-warm function
Select the cooking zone.
1.
Set to
2.
goes out.
a The function is switched off.
Move the cookware.
1.
a The cookware is detected.
a The previously selected power level and flash al-
ternately on the display for the new cooking zone.
Select the new cooking zone to implement the set-
2.
tings.
a The original cooking zone is set to
a The settings are transferred to the new cooking
zone.
Note: If you place a new item of cookware on a differ-
ent cooking zone before you have confirmed the set-
tings, you can use this function for the new item of
cookware.
Keep-warm function1 en
.
13
Advertisement
Table of Contents
