Table of Contents
Advertisement
Appendix: reference
Troubleshooting Tips (Cont.)
Will not AUTO CHANNEL SEARCH active channels
correctly
•
Check to make sure the antenna connections are secure
and correct.
•
Check to make sure the Signal Type: CABLE/ANTENNA
feature is set correctly.
•
If Detect Automatically was selected for the Signal Type in
the AUTO CHANNEL SEARCH menu, try using either CABLE
TV or ANTENNA instead.
•
May not be necessary if using a cable box for all channels.
Contact your local cable company for more information.
Tape plays back in slow motion
•
Press PLAY to return to normal playback.
Cannot select channels over 69
•
Cable channels over 69 can only be selected if Signal Type:
CABLE/ANTENNA feature is set to CABLE.
Cassette with safety tab removed does not
start to play automatically
•
Check to make sure the AUTO PLAY ON/OFF feature is set
to ON.
TIMER indicator flashes
•
The clock is not set.
•
Check to make sure there is a cassette in the VCR when a
timer recording is set.
•
TIMER and RECORD indicators flash when the Pro-Tect
Plus
TM
Locking feature is activated.
Time counter disappears during searching
•
This is normal.
On-screen menus appear in English, French, or
Spanish
•
Check LANGUAGE feature.
No stereo sound during playback
•
Check to make sure the TAPE PLAYBACK feature is set to
Hi-Fi to hear stereo sound during playback. The tape you
are paying must be recorded in Hi-Fi in order to use the HI-
FI feature.
•
Must use the AUDIO/VIDEO jacks on the back of the VCR
to hear stereo sound.
49
Advertisement
Table of Contents
