Table of Contents
Advertisement
4.4
CVBS - Audio L R
CVBS - Composite Video is a high quality
connection. Next to the CVBS signal, add the Audio
Left and Right signals for sound.
• Y shares the same jack with CVBS.
• Component and Composite share audio jacks.
4.5
Audio Out - Optical
Audio Out - SPDIF is a high quality sound connection.
This optical connection can carry 5.1 audio channels.
If your device, typically a Home Theater System
(HTS), has no HDMI ARC connection, you can use this
connection with the SPDIF connection on the HTS.
The SPDIF connection sends the sound from the TV
to the HTS.
You can set the type of the audio out signal to fit the
audio capabilities of your Home Theater System.
For more information, in Help, press the color
key
Keywords and look up Audio out settings.
If the sound does not match the video on screen, you
can adjust the audio to video synchronization.
For more information, in Help, press the color
key
Keywords and look up Audio to video sync.
4.6
Receiver - Set-Top Box
Cable Box
Use 2 antenna cables to connect the antenna to the
Set-top box (a digital receiver) and the TV.
Next to the antenna connections, add an HDMI cable
to connect the Set-top box to the TV.
Switch Off Timer
Switch off this automatic timer if you only use the
remote control for the Set-top box. Switching this
timer off prevents the TV from switching off
automatically after a 4-hour period without a key
press on the TV's remote control.
For more information, in Help, press the color
key
Keywords and look up Switch off timer for
more information.
4.7
Home Theater System - HTS
11
Advertisement
Table of Contents
