Brake Operation - aidapt VA163HAM Assembly And Operating Instructions Manual

ASSEMBLY
1. First remove all contents from the box.
2. To open the transit chair, push seat rails and press downwards until the chair is fully
opened taking care to keep fingers clear of moving parts
(Fig.1).
3. To close the transit chair, take the centre of the seat fabric at the front and back edges
and lift (Fig.2).
Note: The seat rails must be fully engaged in the seat frame support brackets before
sitting down.
Fig. 1 Fig. 2
NB: When opening and closing your transit chair please keep fingers well away from
any possible entrapment areas.
The only part of the chair that can be adjusted are the leg rests. Ideally your knees should
be at 90 degrees with the seat. If you are not sure please contact a healthcare professional
or your local dealer for advice.

BRAKE OPERATION

Parking Brakes (Occupant)
See Fig. 3 which shows the chair with the parking brake not applied. To apply the parking
brake push the handle forward as in Fig. 3a until it 'clicks' and this will apply the brake.
Fig. 3 Fig. 3a