Front Panel Brightness (Vcr Display); Preferred Tape Speed - RCA VR352 User Manual

Setting Up the VCR

Front Panel Brightness (VCR Display)

You can change the brightness level of the fluorescent display
panel on the front of the VCR. Press 4 on the remote control
repeatedly to switch between the options.
• AUTO brightens the display when the VCR is on and dims
the display when the VCR is off.
• BRIGHT keeps the display bright.
• DIM keeps the display at a low brightness level.

Preferred Tape Speed

You can set the preferred tape speed. Press 5 repeatedly to
switch between the options.
• SP sets the preferred recording speed to SP.
• SLP sets the preferred recording speed to SLP.
18
PREFERENCES
1 Remote Control: VCR1
2 Auto Play:
3 EnergySaver:
4 Front Panel:
5 Tape Speed:
0 Exit
The PREFERENCES menu allows you
to access settings for your front
panel brightness feature.
Tape Speeds
SP (Standard Play)
Gives the best quality recording, but
fewer programs can be recorded on
the tape. Special effects such as
pause, slow motion, picture search,
and frame advance work well when
you play back tapes recorded in
this speed.
SLP (Super Long Play)
Gives three times the recording time
of tapes recorded in SP. Special effects
such as pause, slow motion, picture
search, and frame advance work well
when you play back tapes recorded in
this speed.
Recording Time:
Cassette SP
T-120 2Hr
T-160 2Hr
ON
2:00
AUTO
SLP
SLP
6Hr
8Hr