Xiaomi MI Electric Scooter 4 Lite User Manual page 5

1 2 Buckle & Bell Lever
Handlebar
Stem
Brake Lever 5
4
Front Reflector
Quick Release Lever Lock
8
7
10 Wheel Motor Charging Port
11
13 Control Panel & Power Button 14 Scooter Bell
17 Rear Mudguard
Hook
16
Side Reflector
Disc Brake
19 20
Battery Compartment
22
3
Headlight
6 Quick Release Lever
9
Front Fork
Accelerator
12
15 Deck
Tail Light & Rear Reflector
18
Kickstand
21
Control Panel & Power Button
23
24
25
26
23 Speedometer: It displays the current speed when the scooter is working. When the scooter has an issue, it displays an error
code. When the scooter is charging, it displays the current battery level.
Bluetooth: When the icon lights up, it indicates the scooter has been successfully connected to the mobile device.
24
Temperature Warning: If the battery temperature is too high or too low, the thermometer icon will be on. This will result in
25
reduced acceleration and possibly charging issues. Use or charge the scooter after its battery temperature returns to the
normal operating range.
Error Notification: When the wrench icon displays red, it indicates that the scooter has an error.
26
Power Button: Press the button to turn the scooter on, and hold the button for 2 to 3 seconds to turn the scooter off. When
27
the scooter is on, press the button to turn on/off the headlight and tail light, and press twice to cycle through the modes.
Note: The scooter will turn off automatically when it enters standby mode for more than 10 minutes. The standby mode
means that the scooter is not being charged or not locked when it is on and not running.
Battery Level: The battery power is indicated by 5 bars, each representing approximately 20% of a full battery.
28
Inflation: When the inflation icon is on, it means that it is time to maintain the tires. Check the tire pressure and inflate the
29
tires immediately to avoid tire damage caused by inadequate tire pressure. The recommended tire pressure is 45–50 psi.
Note: After performing maintenance, follow the instructions in the app to disable the inflation reminder.
Lock: When the icon lights up, it indicates that the scooter is locked. You can lock/unlock the scooter via the Mi Home/
30
Xiaomi Home app.
Modes: is for walking mode, and its maximum speed is 6 km/h; the t
31
standard mode. S is for sport mode , and it has high speed in this mode; it is recommended to use this mode after mastering
the riding skills.
31
30
29
28
27
aillight will blink r ed when this mode is enabled. D is for