External Recording Mode, Sychronized; Program Recording; Microphone Recording - RCA CDRW121 User Manual

Recording
External Recording Mode
1. Select source (analog/ optical/
coaxial) to match with external
input (e.g. MD)
2. Select auto/ manual track
numbering (see tip).
3. Enter recording mode.
4. Start recording.
5. Start playing source material.
6. Stop recording.
Synchronized Digital Recording
Mode (from External Source)
Synchronized Digital Recording enables fast and
easy digital recording. Track numbers are
automatically assigned as detected from the
digital source material. However, manual
assignment of track numbers is not possible.
1. Enter CD-SYNC mode.
2. Press repeatedly to select
between DISC SYNCREC
(whole disc) / TRACK SYNCREC
(one track) recording.
3. Confirm selection.
RECORD
4. Synchronized recording is on standby.
Start playback of external source and
recording will start automatically.
5. Stop recording or recording
will be stopped automatically at
end of track or disc.

Program Recording

1. Select Dual mode ON.
2. Load source disc on tray A and destina-
tion disc on tray B.
STOP 3. Refer to "Program" (steps 1-7, p. 9) to
create program on source disc (Tray A).
4. Refer to "Dubbing Mode" (p.10) for
program recording (Note: DISC DIGITAL
must be selected for step 4).

Microphone Recording

1. Connect microphone(s) into jack(s) and
adjust microphone level.
2. Refer to "External Recording Mode"
(p.11) for recording (Note: ANALOG must
CD-SYNC be selected for step 1). With the recording
of your favourite music from external input,
you can sing along to make your own
digital recording.
CD-SYNC
Read tips on recording on the
next page!
EN
STOP
11