Reset To Default; Enter The Ion Beam Firmware Update Mode - acaia AIM001 User Manual

Reset to Default

With the Ion Beam powered off, press and hold the switch for 10 seconds until the indicator
blinks, release the switch to reset all settings to default.

Enter the Ion Beam Firmware Update Mode

To enter the update mode, please do the following:
• Press and and the power switch for 10 seconds, the light will be displayed.
• Do not release the power switch. Press and hold for another 10 seconds, the light will
start blinking. The Ion Beam is now in update mode.
• Once the connection is established, the light will stop blinking.
• Click Update on the Updater to start firmware update. The light will start blinking when
update is in progress.
• Once the update is completed, the Ion Beam will turn off automatically.
9