Using The Acaia Ion Beam; Using Acaia Ion Beam For The Orbit; Using Acaia Ion Beam With A Tripod - acaia AIM001 User Manual

Using the Acaia Ion Beam

______________________________________________________________________________

Using Acaia Ion Beam for the Orbit

1
You will need L-shape mount x 1, Spacer x
2, 1/4-20x12 Thumb Screw x 1, M3x12 mm
Screw x 1.
3
Align the short side of the L-shape
mount with the Orbit and fix it in place with
an M3x12 mm screw as shown. The long
side of the mount should be perpendicular
to the Orbit housing.

Using Acaia Ion Beam with a Tripod

1
Place the tripod screw thread into the tripod
socket on the Ion Beam housing.
2
Remove the M3x8 mm screw on the left side
of the motor housing of the Orbit.
4
When installing the Ion Beam, place a
spacer on both sides of the screw hole and
tighten it with a 1/4-20x12 thumb screw. Once
the Ion Beam is installed, position it at 45
degrees angle towards the chute.
2
Rotate your tripod clockwise, until it connects to
the Ion Beam housing. (A standard 1/4 inch tripod
socket ensures universal compatibility)
7