Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for acaia AIM001
- Page 1 Acaia Ion Beam User Manual AIM001 / AIM002 FW 1.0.001...
-
Page 2: Table Of Contents
6 Product Care Information 6 Battery Change 6 Battery Indicators 7 Using the Acaia Ion Beam 7 Using Acaia Ion Beam for the Orbit 7 Using Acaia Ion Beam with a tripod 8 General Information 8 Power On / Off... -
Page 3: Introduction
flying chaff and clumps. The Ion Beam neutralizes either the positive or negative charges that build up during the grinding process, eliminating the static electricity that causes coffee grounds to cling together. With the Acaia Ion Beam, you can expect a better coffee grinding experience, with less mess and more consistency. Features •... -
Page 4: In The Box
In The Box ________________________________________________________________________________ Thank you for choosing one of our products. First, check the shipping carton to find the following: USB Type-C Acaia Ion Beam L-Shape Mount Charging Cable Spacer 1/4-20x12 Thumb Screw M3x12 mm Screw Ion Beam Overview... -
Page 5: Safety Information
Safety Information _______________________________________________________________________________ Read the information below carefully before using your Ion Beam. Incorrect handling of this product could result in personal injury or equipment damage. Please keep this manual for future reference. ! Do NOT touch the carbon brush in the Ion Beam as it may have high voltage. ! Do NOT direct the Ion Beam and its light directly towards human eyes ! Do NOT immerse the Ion Beam in liquids or allow liquids to enter unit. -
Page 6: Product Care Information
When the battery level is low, the LED flashes as low battery warning message. When the battery level is critically low, after the low battery warning appears, the device powers off automatically. Note: • The Acaia Ion Beam is equipped with charging protection to prevent the battery from charging under high temperatures. ... -
Page 7: Using The Acaia Ion Beam
Using the Acaia Ion Beam ______________________________________________________________________________ Using Acaia Ion Beam for the Orbit You will need L-shape mount x 1, Spacer x Remove the M3x8 mm screw on the left side 2, 1/4-20x12 Thumb Screw x 1, M3x12 mm of the motor housing of the Orbit. -
Page 8: General Information
General Information ______________________________________________________________________________ Power On / Off • Click the switch at the bottom of the Ion Beam to turn on the ion beam. The indicator lights up. • Click again to turn on the spotlight. • To turn off the Ion Beam, click the switch at the bottom again. -
Page 9: Reset To Default
Reset to Default With the Ion Beam powered off, press and hold the switch for 10 seconds until the indicator blinks, release the switch to reset all settings to default. Enter the Ion Beam Firmware Update Mode To enter the update mode, please do the following: •... -
Page 10: Specifications
Ø: 42 mm L: 170 mm Battery Lithium-ion rechargeable 3.7 V 780 mAh Battery Life 8 hours Material Aluminum, PC Connectivity Bluetooth 5.0 Warranty 1 Year Acaia Ion Beam x 1 Inside the Package L-Shape Mount x 1 USB Type-C Cable x 1... - Page 11 This user manual is protected by copyright. All rights reserved. No part of this manual may be reproduced, processed, duplicated or published in any form by photocopying, microfilming, reprinting or any other method, in particular electronic means, without the written consent of Acaia. © Acaia, California, 2023.