Table of Contents
Advertisement
1. Wireless antennas
2. Power button/Fingerprint reader*
3. Power light/Fingerprint reader light*
4. Numeric keypad
5. Touchpad
6. Keyboard
7. Speakers
Send and receive radio waves for the built-in wireless LAN (local area
network) and Bluetooth module.
Notes:
• The antennas are not visible from the outside of the computer.
• If the location of the antennas is close to the user's body (< 20 cm),
you can find the Specific Absorption Rate (SAR) values in the Setup
Guide that comes with your computer.
• Press the button to turn on the computer or put the computer into
sleep mode.
• Selected models support the fingerprint reader function. Enroll and
read your fingerprint for user authentication.
The light shows the power status of the computer. If the computer
includes a fingerprint reader, it can also show the status of the reader.
• Power light
– On: The computer is turned on.
– Off: The computer is turned off or in hibernation mode.
– Blinking: The computer is in sleep mode.
• Fingerprint reader light
– Blinking (for two seconds) and then solid amber: The fingerprint
reader is ready.
– Solid white: The fingerprint scan is successful.
To enable or disable the numeric keypad, press the Num Lock key.
Perform finger touch and all the functions of a traditional mouse.
Note: The touchpad also supports multi-touch function.
Enter characters and interact with programs.
Note: The keyboard also includes hotkeys and function keys for
changing settings and performing tasks quickly.
Produce sound.
.
Chapter 1
Meet your computer
3
Advertisement
Table of Contents
