Table of Contents
Advertisement
1. System status light
2. Novo button hole
3. SD card slot
4. USB (3.2 Gen 1) Type-A connector
5. USB (3.2 Gen 1) Type-A connector
(always-on)
Indicate the system status of your computer.
• Solid white: The computer is turned on; battery capacity 21%–
100%
• Blinking quickly: The computer is turned on; battery capacity 1%–
20%
• Blinking slowly: The computer is in sleep mode.
• Off: The computer is turned off.
Press the Novo button to open the Novo Button menu. From the
menu, you can choose to open the UEFI/BIOS setup utility, the Boot
menu, or the Windows startup options screen.
Insert an SD card or a MultiMediaCard (MMC) into the slot for data
transfer or storage.
Connect to a USB-compatible device, such as a USB keyboard, a
USB mouse, a USB storage device, or a USB printer.
The always-on connector can charge external devices when the
computer is turned off, in sleep or hibernation mode. The always-on
function can be turned on or off in the UEFI/BIOS setup utility.
Note: If Lenovo Vantage is pre-installed on your computer, you can
also set always-on function within that software.
.
Chapter 1
Meet your computer
7
Advertisement
Table of Contents
