Page 1
Model No. PFTL59420.0 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal REGISTER YOUR PRODUCT To register your product and activate your warranty today, go to my.proform.com. CUSTOMER CARE For service at any time, go to support.proform.com.
Note: The decals may not be shown at actual size. PROFORM and IFIT are registered trademarks of ICON Health & Fitness, Inc. App store is a trademark of Apple Inc., registered in the U.S. and other countries. Android and Google Play are trademarks of Google LLC. The Bluetooth ®...
5. The treadmill is intended for home use only. purchase a surge suppressor, see your local Do not use the treadmill in any commercial, PROFORM dealer, call the telephone number rental, or institutional setting. on the front cover of this manual, or see your local electronics store.
Page 4
19. Always stand on the foot rails when starting frame securely in the storage position. Do or stopping the walking belt. Always hold the not operate the treadmill while it is folded. handrails while using the treadmill. 25. Do not change the incline of the treadmill by 20.
BEFORE YOU BEGIN Thank you for selecting the new PROFORM ® 505 CST manual. To help us assist you, note the product model treadmill. The 505 CST treadmill provides an impres- number and serial number before contacting us. The sive selection of features designed to make your model number and the location of the serial number workouts at home more effective and enjoyable.
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
ASSEMBLY 1. To use the assembly steps in this manual, first see the helpful tips below. • To hire a service technician to assemble this • Left parts are marked “L” or “Left” and right parts product in your home, call 1-800-445-2480. are marked “R”...
Page 9
2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (88) to the front of the Base (97). Next, identify the Right Upright (86). Have a second person hold the Right Upright near the Base (97).
Page 10
4. Set the Right Upright (86) on the Base (97) as shown. Make sure not to pinch the Upright Wire (88). Slide the Right Upright so that the 3/8" x 2 3/8" Screw (3) in the Base is inserted into the slot (E) in the Right Upright; do not fully tighten the Screw yet.
Page 11
6. Attach a Handrail (80) to the Right Upright (86) with two 5/16" x 1 1/2" Screws (7) and two 5/16" Star Washers (12) in the location shown; start both Screws, and then tighten them. Make sure not to pinch the Upright Wire (88), and make sure that the wire is on the indicated side of the Upright.
Page 12
8. With the help of a second person, hold the con- sole assembly (G) near the Right Upright (86). Next, insert the Upright Wire (88) through the indicated looped tie (48) and connect it to the console wire (H). The connectors should slide together easily and snap into place.
Page 13
10. IMPORTANT: To avoid damaging the Crossbar (87), do not use power tools and do not overtighten the #10 x 3/4" Screws (6). Attach the Crossbar (87) to the Handrails (80) with four #10 x 3/4" Screws (6) and four #10 Star Washers (10);...
Page 14
12. Tighten all eight indicated Screws (1, 2, 3). 1, 2, 3 1, 2, 3 13. Note: If the treadmill is assembled on a smooth surface, it may roll forward during this step. Raise the Frame (60) to the upright position. IMPORTANT: Do not raise the Frame past the vertical position.
Page 15
14. Remove the 5/16" Nut (39) and the 5/16" x 1 3/4" Bolt (28) from the bracket on the Base (97). Next, orient the Storage Latch (35) as shown. Attach the lower end of the Storage Latch (35) to the bracket on the Base (97) with the 5/16"...
Page 16
(see the front cover of this manual). To register your product and activate your warranty today, go to my.proform.com. 17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To avoid damage to the console, keep the treadmill out of direct sunlight.
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD capable of carrying 15 or more amps. To avoid overloading the circuit, do not plug other electrical Use a Surge Suppressor devices, except for low-power devices such as cell phone chargers, into the surge suppressor or into Your treadmill, like other electronic equipment, can be an outlet on the same circuit.
Page 18
CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the console’s sound system while you IMPORTANT: To activate your console and begin exercise. using its exclusive features, see assembly step 16 on page 16.
Page 19
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before you turn on the power. If you do See HOW TO TURN ON THE POWER at the left.
Page 20
5. Follow your progress with the display. To turn off the scan mode, press the Display button; the scan indicator and the word SCAN will The display can show the following workout turn off. information: You can also customize the scan mode to display Calories (CALS)—The approximate number of only the desired workout information in the calories you have burned.
Page 21
HOW TO USE AN ONBOARD WORKOUT The workout will continue in this way until the last segment ends. The walking belt will then 1. Insert the key into the console. slow to a stop. See HOW TO TURN ON THE POWER on page 19. If the speed or incline setting for the current seg- ment is too high or too low, you can manually over- 2.
Page 22
HOW TO CONNECT YOUR TABLET TO THE 5. Disconnect your tablet from the console if CONSOLE desired. The console supports Bluetooth connections to tablets To disconnect your tablet from the console, first via the iFit—Workouts at Home app and to compatible select the disconnect option in the iFit—Workouts heart rate monitors.
Page 23
THE SETTINGS MODE Display Test—This screen is intended to be used by service technicians to identify whether the 1. Select the settings mode. display is working correctly. To select the settings mode, press Button Test—This screen is intended to be used the gear button (P).
Page 24
Demo Mode—The currently selected demo mode THE OPTIONAL TABLET HOLDER option will appear in the display. The console features a demo mode, designed to be used if the The optional tablet treadmill is displayed in a store. If the demo mode holder (P) will hold is turned on, the console will not turn off and the your tablet securely...
FCC INFORMATION This console has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left.
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal per- as shown (A), the switch has tripped. To reset the formance and to reduce wear. Inspect and properly power switch, wait for five minutes and then press tighten all parts each time the treadmill is used.
Page 28
SYMPTOM: The walking belt slows when walked on SYMPTOM: The walking belt is off-center or slips when walked on a. Use only a surge suppressor that meets all of the specifi cations described on page 17. a. If the walking belt is off-center, fi rst remove the key and UNPLUG THE POWER CORD.
EXERCISE GUIDELINES Aerobic Exercise—If your goal is to strengthen your WARNING: cardiovascular system, you must perform aerobic Before beginning this exercise, which is activity that requires large amounts or any exercise program, consult your physi- of oxygen for prolonged periods of time. For aerobic cian.
PART LIST Model No. PFTL59420.0 R0121A Key No. Qty. Description Key No. Qty. Description 3/8" x 1 1/4" Screw Walking Belt 3/8" x 1 1/2" Screw Belt Guide 3/8" x 2 3/8" Screw Rubber Cushion #8 x 3/4" Screw 1/2" Pin #8 x 1/2"...
Page 31
Key No. Qty. Description Key No. Qty. Description Base Console Frame Left Tray Console Ground Wire Right Tray – User’s Manual Console Base Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the PFTL59420.0 and is the answer not in the manual?
Questions and answers