Cleaning - Globaltronics Audio Affairs PR 002 Operating Instructions Manual

_Steckdosenradio_PR002.book Seite 63 Donnerstag, 18. Januar 2018 4:32 16
3. When in operation, press the button MODE until the operating
mode AUX in is selected. The LED is lit green continuously.
4. Start playback on the connected device.
The playback is controlled using the external device, however
the volume can also be adjusted using the power socket radio.
5. Switch off both devices before disconnecting.
NOTE: if the playback is distorted, this may be because the volume
level on the external device is set too high. Turn down the volume on
the external device, and instead increase the volume on the power
socket radio.

12. CLEANING

DANGER! Disconnect the device from the power supply
before cleaning. Ensure that no liquid gets into the device.
CAUTION: solvents, alcohol, thinning agents etc. must never be
used, as these can damage the surface of the device.
Do not use any corrosive or abrasive cleaning agents. These could
damage the surface of the device.
Casing
Clean the casing with a damp cloth.
CUSTOMER SERVICE
0800 - 5000 136
63
www.gt-support.de