Download Print this page
Xinje VB3 User Manual
Hide thumbs Also See for VB3:

Advertisement

Quick Links

All manuals and user guides at all-guides.com
VB3/VB5/V5
VB3/VB5/V5
VB3/VB5/V5
VB3/VB5/V5
User
manual
User
User
User manual
manual
manual
frequency
inverter
frequency
frequency
frequency inverter
inverter
inverter
Xinje Electronic Co.,Ltd.
No. INV C 01 20081130 204

Advertisement

loading
Need help?

Need help?

Do you have a question about the VB3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Xinje VB3

  • Page 1 All manuals and user guides at all-guides.com VB3/VB5/V5 VB3/VB5/V5 VB3/VB5/V5 VB3/VB5/V5 frequency inverter frequency frequency frequency inverter inverter inverter User manual User User User manual manual manual Xinje Electronic Co.,Ltd. No. INV C 01 20081130 204...
  • Page 2 Contents Preface Preface Preface Preface ——————————————— ——————————————— ——————————————— ——————————————— Safty Safty Precautions Precautions Safty Safty Precautions Precautions VB3/VB5/V5 ——————————————— ——————————————— ——————————————— ——————————————— Series Inverter Product Product Product In In In Introductions troductions troductions Product troductions User Manual ——————————————— ——————————————— ———————————————...
  • Page 3 The device and its components can only be used in the applications described in the catalog and the technical manuals, can only be connected with devices or components from other manufacturers which have been approved or recommended by Xinje. The products will run normally in the condition of been transported, stored, configured and installed correctly, been operated and maintained as recommended.
  • Page 4 All manuals and user guides at all-guides.com VB3/VB5/V5 series inverter Catalog Catalog Catalog Catalog PREFACE PREFACE PREFACE..............................................................................................................1 1 1 1...
  • Page 5 All manuals and user guides at all-guides.com VB3/VB5/V5 seires inverter 3-1-2. Frequency setting channel..............................27 3-1-3. Running state..................................27 3-1-4. Running modes...................................27 3-2. 3-2. 3-2. 3-2. Use Use the the keyboard keyboard keyboard keyboard......................................................................................................................................28 28 28 28 3-2-1.
  • Page 6 All manuals and user guides at all-guides.com VB3/VB5/V5 series inverter 6-3. 6-3. Warranty Warranty Warranty of of of of the inverter inverter inverter........................................................................................................................... . 92 92 92 92 6-3.
  • Page 7 Preface Preface Preface Preface ——Essential introduction for this manual Thank you for purchasing Xinje inverter, this manual should be read and understood before attempting relevant operations. 1. 1. 1. 1. Purpose Purpose Purpose Purpose of of of of this this...
  • Page 8 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter Safety Safety Precautions Precautions Safety Safety Precautions Precautions ——Essential Essential Essential Essential introduction introduction introduction introduction about about about about product product product product operation operation operation operation Upon unpacking, please confirm that: Check whether the model and the rated values on the nameplate of the inverter are in accordance with your order.
  • Page 9 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter 1. Confirm that the voltage of the main AC power supply satisfies the rated voltage of the Inverter. Injury and fire may occur if the voltage is not right. 2. Do not perform voltage withstand tests on the Inverter. Otherwise, semiconductor elements and other devices can be damaged.
  • Page 10 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter � � � � M M M M echanical echanical echanical echanical resonance resonance resonance resonance point point point point of of of of load load load load The inverter may encounter the mechanical resonance point of load within certain output frequency range. Jump frequencies have to be set to avoid it.
  • Page 11 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter � � � � About About About About protect protect protect protection ion classes classes classes classes The protection class of V5/F5 series inverter IP20 is reached in the case of status display unit or keyboard.
  • Page 12 VB5: VVVF/vector control 4:380V VB3: VVVF control, mini type (B means black cover) VB3 only has 220V level types; V5/VB5 series frequency inverter has 220V and 380V voltage levels. Suitable motor capability is from 0.4KW to 55KW. Please Please Please...
  • Page 13 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter 2 2 2 2 2 2 2 2 0V Type Type VB3-20P4 VB3-20P4 VB3-20P7 VB3-20P7 VB5-21P5 VB5-21P5 Type Type VB3-20P4 VB3-20P4 VB3-20P7 VB3-20P7 VB5-21P5 VB5-21P5 Output Match Motor(KW) 0.75 Output Current(A)
  • Page 14 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter Optimized space voltage vector SVPWM modulation Modulation mode Control mode SVPWM control (dead zone compensation for optimized low-frequency) Digital Setting: max frequency×±0. 01%; Frequency precision Analog Setting: max frequency×±0.2% Main...
  • Page 15 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter V/F curve is optimized automatically according to the load condition to realize Auto energy saving running energy saving operation Auto current limiting running current is limited automatically to avoid trip caused by overcurrent...
  • Page 16 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter 4 bits LED display MENU DATA Buttons STOP RESET Control terminals Analog potentiometer Power terminals Mounting hole VB5 series series series series 1.5KW~3.7KW 1.5KW~3.7KW 1.5KW~3.7KW 1.5KW~3.7KW VB5 series series series series 5.5KW~7.5KW...
  • Page 17 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter MENU MENU STOP DATA RESET STOP DATA RESET WARNING ! * STORED CHARGE DO NOT TOUCH UNTIL 10 MIN. AFTER DISCO- NNECTION * DO NOT CONNECT AC POWER TO OUTPUT TERMINALS OF "U V W"...
  • Page 18 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter 1-4. 1-4. 1-4. 1-4. Product Product Product Product d d d d imension imension imension imension series 0. 0. 0. 0.4 4 4 4 ~0.75 (Unit: � � � �...
  • Page 19 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter (Unit: � � � � VB5 series series series series 5.5~7.5KW 5.5~7.5KW 5.5~7.5KW 5.5~7.5KW Unit: Unit: Unit: mm mm) MENU STOP DATA RESET 167.0 180.0 (Unit: � � � �...
  • Page 20 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter Type V5-4011 V5-4015 V5-4018 V5-4022 V5-4030 V5-4037 V5-4045 V5-4055 1-5. Choose Choose f f f f ittings ittings 1-5. 1-5. 1-5. Choose Choose ittings ittings � Brak Brak Brak Braking...
  • Page 21 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter 18.5 5000 27.2 5000 6000 BRU-4045 9600 13.6 9600 12000 � � � � O O O O per panel panel mounting mounting seat seat perate ate panel panel mounting...
  • Page 22 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter 2 2 2 2 Installation Installation Installation Installation and and W W W W iring iring iring iring 2-1. Installation environment 2-1. 2-1. 2-1. Installation Installation Installation environment environment environment...
  • Page 23 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter 2-2. 2-2. 2-2. 2-2. Wiring Wiring Wiring Wiring Caution Caution Caution Caution � Wiring after power off for at least 10 minutes, otherwise, an electronic short may occur. � Do not connect AC power to output terminals U, V and W.
  • Page 24 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter Fig. A Fig. B Fig. C Fig. D Fig. E Fig. F Fig. G The relationship between main circuit terminals and inverter types: Main circuit I/O terminals are shown in table 2-1:...
  • Page 25 (3) L1, L2, L3 terminals are suitable for VB5 series 1.5~3.7KW three phase types. (4) VB5 series 1.5~3.7KW three phase has no digital input X5, analog input Vi and digital output DO. (5) VB3/VB5 series single phase have no X4~X6, VI, AO, DO, OC, P+, P-, PB. 2-5.
  • Page 26 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter Fig 2 2 2 2 -4 4 4 4 (b b b b )control control control control panel panel panel panel jumper jumper jumper jumper position position position position 1.5~3.7KW VB5 series three phase inverter jumper position Fig 2 2 2 2 -4 4 4 4 (c c c c )control...
  • Page 27 P4.11 and description of output AC250V/1A (COSΦ=0.4) terminals DC30V/1A 2. Control circuit terminals CN2 VB3 series single phase 0.4~0.75KW VB5 series single phase 1.5KW VB5 series three phase 1.5~3.7KW VB5 series three phase 5.5~7.5KW V5 series 11~55KW Fig.
  • Page 28 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter 3. CN2 terminals’ function description are shown as below: Table Table terminals terminals terminals’ ’ ’ ’ function function function description description Table Table 2-4 2-4 CN2 CN2 terminals function description...
  • Page 29 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter +10V power Offer +10V power supply Max output current:50mA supply (negative terminal:GND) +10V power supply Reference ground of analog signal common and +10V power supply COM is isolated with GND inside...
  • Page 30 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter F F F F ig. ig. ig. ig. 2-8 Analog Analog output output wiring wiring 2-8 Analog Analog output output wiring wiring Note Note Note: : : : Note (1) When using analog input, you can connect filter capacitor or common mode inductor between VI and GND, or CI and GND.
  • Page 31 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter (Inverters motors are all all all all grounded grounded well well) ) ) ) (Inverters (Inverters (Inverters and and motors motors motors are grounded grounded well well Fig. Fig. Fig.
  • Page 32 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter Table Table Table Table 2-5 2-5 solution solution solution solution for for control control control control noise noise noise noise Noise transmit Solution path When the external equipment forms a loop with the inverter, the equipment may operate incorrectly caused by leakage current of inverter grounding cable.
  • Page 33 All manuals and user guides at all-guides.com VB3/V5/VB5 series inverter (7) Do not connect other devices to inverter’s power input terminals (R, S, T or L,N ).
  • Page 34 All manuals and user guides at all-guides.com V5 series inverter 3 3 3 3 Operating Operating Operating Operating Instructions Instructions Instructions Instructions 3-1. 3-1. inverter inverter 3-1. 3-1. Run Run the the inverter inverter 3-1-1. 3-1-1. 3-1-1. 3-1-1. Command Command Command Command channel channel...
  • Page 35 All manuals and user guides at all-guides.com V5 series inverter When the inverter is in the stopping state, it will running according to jog frequency (refer to P3.06~P3.08 for details) after receiving jog running command (e.g after pressing key) 1 1 1 1 :Close Close Close loop...
  • Page 36 All manuals and user guides at all-guides.com V5 series inverter panel and control terminals, operation panel is shown in Fig.3-2. 0.4~0.75KW 0.4~0.75KW VB5-OPU-01 VB5-OPU-01 V5-OPU-03 V5-OPU-03 VB3 0.4~0.75KW 0.4~0.75KW VB5-OPU-01 VB5-OPU-01 V5-OPU-03 V5-OPU-03 MENU MENU DATA STOP RESET MENU ENTER...
  • Page 37 All manuals and user guides at all-guides.com V5 series inverter 3-2-3. 3-2-3. Fucntion Fucntion description description description of of of of LED indicator indicator 3-2-3. 3-2-3. Fucntion Fucntion description LED and and indicator indicator The operation panel consists of 4 bits-8 segments LED, 3 unit indicators and 3 state indicators. The three unit indicators have 6 different combinations and each combination corresponds to one type of unit while settting parameters.The relationship between the combination of the indicators and the unit are shown in Fig.3-3.
  • Page 38 All manuals and user guides at all-guides.com V5 series inverter Power on and Stop status, display running status, Fig. A Fig. B Fig. C initialize, display the stop parameters display the running the dynamic picture parameters Fig. 3 3 3 3 -4 4 4 4 Display Fig.
  • Page 39 All manuals and user guides at all-guides.com V5 series inverter Fig. 3 3 3 3 -6 6 6 6 Editing Fig. Fig. Editing Editing status status Fig. Editing status status 3- 3- 3- 3-2-5 2-5..Panel Panel Panel operation operation...
  • Page 40 All manuals and user guides at all-guides.com V5 series inverter F F F F ig. ig. ig. ig. 3-8 3-8 Parameter Parameter Parameter Parameter editing editing editing editing In the third level menu, the parameter can’t be changed if none digit of the parameter is flashing, the possible reasons are: (1) The setting of this parameter can not be changed, such as the actural detected parameters or recorded parameters.
  • Page 41 All manuals and user guides at all-guides.com V5 series inverter 5 5 5 5 ..Inquiry Inquiry Inquiry Inquiry fault fault fault fault parameters: parameters: parameters: parameters: Fig. Fig. Fig. Fig. 3-11 3-11 3-11 3-11 Inquiry Inquiry Inquiry Inquiry operation operation...
  • Page 42 All manuals and user guides at all-guides.com V5 series inverter Fig. 3-12 Procedures Procedures of of of of starting starting driver first time Fig. Fig. Fig. 3-12 3-12 3-12 Procedures Procedures starting starting the the driver driver driver for for the the first first first time...
  • Page 43 All manuals and user guides at all-guides.com V5 series inverter 4 4 4 4 Function Function Function Function Parameters Parameters Parameters Parameters 4-1. 4-1. Function Function parameter parameter table table 4-1. 4-1. Function Function parameter parameter table table “ ○ ” : Parameters can be changed while running “...
  • Page 44 All manuals and user guides at all-guides.com V5 series inverter lection 1:S curve Acc/Dec ○ P0.14 Low speed time of S 10.0%~50.0%(Acc/Dec time) 0.1% 20.0% ramp P0.14+P0.15<90% ○ P0.15 Linear time of S 10.0%~80.0%(Acc/Dec time) 0.1% 60.0% ramp P0.14+P0.15<90% × P0.16 Acc/Dec time unit 0:second...
  • Page 45 All manuals and user guides at all-guides.com V5 series inverter ○ P1.07 Min reference of CI 0.00~ P1.09 0.01V 0.00V ○ P1.08 Frequency 0.00~high frequency limit 0.01Hz 0.00Hz corresponding min reference of CI P1.07 ~10.00V ○ P1.09 Max reference of 0.01V 10.00V ○...
  • Page 46 All manuals and user guides at all-guides.com V5 series inverter frequency at stop ○ P2.07 injection braking 0.0~60.0s 0.1s 0.0s waiting time at stop ○ P2.08 injection braking 0.0~80.0% 0.1% 0.0% current at stop 4 4 4 4 ..Auxiliary Auxiliary Auxiliary running...
  • Page 47 All manuals and user guides at all-guides.com V5 series inverter × P3.01 Parameter initialization Unit’s place: locking up 0: All parameters are allowed modifying 1: Only P3.01 can be modified 2:Only P0.02 and P3.01 can be modified Ten’s place: 0:disabled 1:Restore to factory setting 2:Clear fault record ×...
  • Page 48 All manuals and user guides at all-guides.com V5 series inverter ontrol PLC 0.0:Detection disabled × P3.12 Delay for responding to 0~1000ms control PLC × P3.13 Reference proportion of 0.01~1.00 0.01 1.00 communication frequency ○ P3.14 Acc time 2 0.1~6000.0 10.0 ○...
  • Page 49 All manuals and user guides at all-guides.com V5 series inverter ion 2 Unit’s place:b-25~b-28 Ten’s place:b-29~b-32 Hundred’s place:b-33~b-36 Thousand’s place:b-37~b-40 ○ P3.43 Display parameters 0000~4040 0001 Ten’s place, unit’s pladce :stop selection 3 displayed parameter selection Thousand’s place, hundred’s place : run displayed parameter selection ○...
  • Page 50 All manuals and user guides at all-guides.com V5 series inverter 19:Frequency selector 1 20:Frequency selector 2 21:Frequency selector 3 22:Terminal control mode is forcibly enabled 23:Control mode selector 1 24:Control mode selector 2 25:Start traverse operation 26 : Reset the traverse operation status 27:Close-loop disabled 28 :...
  • Page 51 All manuals and user guides at all-guides.com V5 series inverter 2 : Frequency detection threshold(FDT1) 3 : Frequency detection threshold(FDT2) : Overload pre- alarm(OL) 5 : Inverter under voltage locking(LU) : External fault stop(EXT) 7: Output frequency arrive upper limit of(FH) 8:Output frequency arrive lower limit(FL)...
  • Page 52 All manuals and user guides at all-guides.com V5 series inverter nverter’s rated voltage) 3:Bus voltage(0~800V) 4:PID reference 5:PID feedback 6:VI(0~10V) 7:CI(0~10V/4~20mA) Analog output ( AO)gain ○ P4.18 0.50~2.00 0.01 1.00 setup ○ P4.19 AO output mode 0:4~20mA 1:0~10V ○ P4.20 DO output terminal 0:Output frequency(0~...
  • Page 53 All manuals and user guides at all-guides.com V5 series inverter ○ P5.05 Frequeny decrease rate 0.00~99.99Hz/s 0.01Hz/s 10.00Hz/s when current limiting × P5.06 Auto current limiting 0:Disabled in constant speed selection 1: Enabled in constant speed Note:Enabled at Acc/Dec × P5.07 setting of the restart after 0:Disabled...
  • Page 54 All manuals and user guides at all-guides.com V5 series inverter 2: Analog reference by CI ○ P7.02 Feedback channel selection 0:VI (0~10V) 1: Analog reference by CI 2:VI+CI 3:VI-CI 4:Min{VI,CI} 5:Max{VI,CI} ○ P7.03 Reference filter 0.01s 0.50s 0.01~50.00s ○ P7.04 Feedback filter 0.01~50.00s 0.01s...
  • Page 55 All manuals and user guides at all-guides.com V5 series inverter 0:Run again from stage 1 1: Continue to run from the stopping stage Hundred’s place: Save at power off 0:Not saving 1: Save the time and frequency at power off Thousand’s place :Selecting the unit of time 0:second 1:minute...
  • Page 56 All manuals and user guides at all-guides.com V5 series inverter 1:Manual mode Ten’s place of LED:Amplitude control 0:Variable amplitude 1:Fixed amplitude ○ P9.02 Pre-traverse frequecncy 0.00~500.00Hz 0.01Hz 0.00Hz Waiting time before pre- ○ P9.03 0.0~3600.0s 0.1s 0.0s traverse frequency ○ P9.04 Traverse operating amplitude 0.0~50.0%...
  • Page 57 All manuals and user guides at all-guides.com V5 series inverter × PA.09 Stator resistance of motor 0.001~50.000Ω 0.001Ω Dependent inverter’s model × PA.10 Rotor resistance of motor 0.001~50.000Ω 0.001Ω Dependent inverter’s model × PA.11 Over current protection 0~15 coefficient of torque ×...
  • Page 58 All manuals and user guides at all-guides.com V5 series inverter PF.02 Software version PF.03~PF.10 Reversed 14 14 14 14..B B B B —Monitor Monitor Monitor Monitor function function function function parameters parameters parameters parameters B B B B —Monitor Monitor Monitor function...
  • Page 59 All manuals and user guides at all-guides.com V5 series inverter...
  • Page 60 All manuals and user guides at all-guides.com V5 series inverter 4-2. 4-2. 4-2. 4-2. Parameter Parameter Parameter Parameter d d d d escription escription escription escription 4-2-1 4-2-1 4-2-1 4-2-1..Basic Basic Basic Basic operating operating operating operating function function function...
  • Page 61 All manuals and user guides at all-guides.com V5 series inverter P0.04 P0.04 running running direction direction Range Range Range:00 00 00 00~11 11 11 11 00 00 00 00 P0.04 P0.04 Set running running direction direction Range The unit’s place of this parameter is active with panel control mode to operate jog. Unit’s place of LED:...
  • Page 62 All manuals and user guides at all-guides.com V5 series inverter (a)Torque boost of constant torque curve (b)Torque boost of square torque curve Fig. 4 4 4 4 —3 3 3 3 Torque Fig. Fig. Fig. Torque Torque Torque boost boost boost boost P0.10...
  • Page 63 All manuals and user guides at all-guides.com V5 series inverter Note Note Note Note:(1) In order to achieve better performances, the ratio of carrierfrequency to the maximum running frequency of the inverter should be less than 36. (2) When the carrier frequency is low, the current display value may has error. Range:0 0 0 0 、1 1 1 1 P0.13 P0.13...
  • Page 64 All manuals and user guides at all-guides.com V5 series inverter Fig. Fig. Fig. Fig.4-6 4-6 Acc/Dec Acc/Dec Acc/Dec Acc/Dec time time time time Note Note Note:(1)This series inverter defines seven kinds of Acc/Dec time. Here only defines Acc/Dec time 1, Acc/Dec time 2~7 are Note defined in P3.14~P3.25.
  • Page 65 All manuals and user guides at all-guides.com V5 series inverter Fig. Fig. Fig. Fig.4 4 4 4 - - - - 7 7 7 7 V/F V/F curve curve curve curve Fig. Fig. Fig. Fig. 4 4 4 4 - - - - 8 8 8 8 U U U U ser-defined ser-defined ser-defined ser-defined V/F...
  • Page 66 All manuals and user guides at all-guides.com V5 series inverter P1.11 P1.11 input input pulse pulse frequency frequency frequency of of of of PULSE PULSE PULSE Range Range 20.0K 20.0K 10.0K 10.0K P1.11 P1.11 Max input input pulse pulse frequency PULSE Range Range:0.1...
  • Page 67 All manuals and user guides at all-guides.com V5 series inverter 4-2-3 4-2-3 4-2-3..Starting Starting Starting braking braking parameters parameters Group Group 4-2-3 Starting and and braking braking parameters parameters(Group Group P2 P2) P2.00 P2.00 P2.00 P2.00 Starting Starting Starting...
  • Page 68 All manuals and user guides at all-guides.com V5 series inverter DC injection braking current at start is a percentage value of inverter’s rated current. There is no DC injection braking when the braking time is 0.00s. Fig. Fig. 4-11 4-11 Starting Starting mode...
  • Page 69 All manuals and user guides at all-guides.com V5 series inverter 9:RS485-CI-Increase/Decrease key reference 10:RS485+CI+External pulse reference 11:RS485-CI-External pulse reference 12:RS485+VI+External pulse reference 13:RS485-VI-External pulse reference 14:VI+CI+Increase/Decrease key reference+Digital setting P0.02 15:VI+CI-Increase/Decrease key reference+Digital setting P0.02 16:MAX(VI,CI) 17:MIN(VI,CI) 18:MAX(VI,CI,PLUSE) 19:MIN(VI,CI,PLUSE) 20:VI,CI is active,VI is priority Parameter Parameter Parameter...
  • Page 70 All manuals and user guides at all-guides.com V5 series inverter speed at a certain value with dynamic compensation for slip frequency of asynchronism motor. If use auto-torque boost function in addition, better low speed moment characteristic can be get. As shown in Fig.4-13. Fig.
  • Page 71 All manuals and user guides at all-guides.com V5 series inverter 5:38400BPS Ten’ ’ ’ ’ s s s s place place place of of of of LED place LED: Set digital format, the values are show below: 0:1-7-2 format,no parity check;1 stop bit ,7 data bits,2 stop bits,no parity check. 1:1-7-1 format,odd;1 stop bit,7 data bits,1 stop bits,odd 2:1-7-1 format,even;1 stop bit,7 data bits,1 stop bit,even 3:1-8-2 format,no parity check;1 stop bit,8 data bits,2 stop bits,no parity check.
  • Page 72 All manuals and user guides at all-guides.com V5 series inverter P3.26 P3.26 Multi-frequency Multi-frequency Multi-frequency 1 1 1 1 Range Range lower lower limit limit limit of of of of frequency frequency frequency upper upper limit limit limit of of of of frequency frequency frequency 5.00H...
  • Page 73 All manuals and user guides at all-guides.com V5 series inverter C: C: C: Ten Ten’ ’ ’ ’ s s s s place, place, place, D: D: D: Unit Unit Unit Unit’ ’ ’ ’ s s s s place place place place, D:...
  • Page 74 All manuals and user guides at all-guides.com V5 series inverter Control terminal leave unused Frequency selector 1 Multi-step speed control terminal 1 Frequency selector 2 Multi-step speed control terminal 2 Frequency selector 3 Multi-step speed control terminal 3 Terminal control mode is forcibly enabled Exteral terminal for forward jog operation Control mode selector 1 Exteral terminal for reverse jog operation...
  • Page 75 All manuals and user guides at all-guides.com V5 series inverter The definition of X1, X2 and X3 are shown below: P4.00=1, P4.01=2, P4.03=3,X1, X2 and X3 can be used to achieve multi-step speed operation, as shown in Fig.4-18. Fig. Fig. 4-18 4-18 Multi-step...
  • Page 76 All manuals and user guides at all-guides.com V5 series inverter 12 12 12 12: : : : DC DC injection injection injection injection braking braking braking braking command command command command DB DB, , , , the terminal can be used to perform DC injection braking to the motor that is running so as to realize the emergent stop and accurate location of the motor.
  • Page 77 All manuals and user guides at all-guides.com V5 series inverter and the setting of start/stop control, direction, Acc/Dec time mode in low level operation. Note Note Note Note:Switching between close-loop operation and low level operation can be realized only when close-loop is enabled (P7.00 =1).
  • Page 78 All manuals and user guides at all-guides.com V5 series inverter Fig. Fig. 4-23 4-23 3-wire 3-wire operation operation mode mode mode 1 1 1 1 Fig. Fig. 4-23 4-23 3-wire 3-wire operation operation mode Xi is the multi-function input terminal of X1~X6, here you should define its function as No.9 “3-wire control mode”. 3 3 3 3 :3-wire 3-wire 3-wire...
  • Page 79 All manuals and user guides at all-guides.com V5 series inverter Stop braking time Output frequency arrive upper limit(FH) High and lower limits of traverse operating frequency Output frequency arrive lower limit(FL) Inverter zero speed running set running time arriving Simple PLC Pause running finished Instruction Instruction Instruction...
  • Page 80 All manuals and user guides at all-guides.com V5 series inverter 20 20 20 20:Set running time arriving..When the accumulating time(P3.40)arrive the reference time (P3.39), an indication signal will be output. P4.12 5.00Hz P4.12 P4.12 P4.12 Detecting Detecting Detecting Detecting range...
  • Page 81 All manuals and user guides at all-guides.com V5 series inverter 0~10V/4~20mA As to the analog output of AO, you can adjust the output gain to change the measuring range or calibrate the meter. Range:0 0 0 0 、1 1 1 1 P4.19 P4.19 output...
  • Page 82 All manuals and user guides at all-guides.com V5 series inverter 4-2-6 4-2-6 4-2-6..Protective Protective Protective function function parameters parameters Group Group 4-2-6 Protective function function parameters parameters(Group Group P5 P5) P5.00 P5.00 P5.00 P5.00 Motor Motor Motor Motor overload overload...
  • Page 83 All manuals and user guides at all-guides.com V5 series inverter Fig. Fig. Fig. Fig. 4-31 4-31 4-31 4-31 Over Over Over Over voltage voltage voltage voltage function function function function P5.04 P5.04 Auto current limiting threshold Range Range 200( 200( 200(%) ) ) ) 150(%) 150(%)
  • Page 84 All manuals and user guides at all-guides.com V5 series inverter (2) This function is disabled with the fault protection caused by overload and overheat. 4-2-7 4-2-7 4-2-7 4-2-7..Fault Fault Fault Fault recording recording recording recording parameters parameters parameters parameters(Group...
  • Page 85 All manuals and user guides at all-guides.com V5 series inverter adjustment are defined in P7.01~P7.11. The relationship between reference and feedback are shown in Fig4-34, thereinto, 10V corresponds to 100% of reference and 20mA corresponds to 100% of feedback. The aim of reference adjustment and feedback adjustment is to confirm the corresponding relationship and dimension of unification, as shown in Fig.4-33.
  • Page 86 All manuals and user guides at all-guides.com V5 series inverter Both the external reference signal and feedback signal have interferences, while these can be filtered by setting the time constant of filter (P7.03 and P7.04), the longer the filter time, the better the immunity capability, but the slower the response; on the contrary, the shorter the filter time , the worse the immunity capability, but the quicker the response.
  • Page 87 All manuals and user guides at all-guides.com V5 series inverter Fig. Fig. 4-37 4-37 Limits Limits Limits of of of of deviation deviation deviation Fig. Fig. 4-38 4-38 close-loop close-loop preset preset frequency frequency Fig. Fig.4-37 4-37 Limits deviation Fig. Fig.4-38 4-38 close-loop close-loop preset...
  • Page 88 All manuals and user guides at all-guides.com V5 series inverter After start command is set out, the motor will start and accelerate to the frequency in the Acc time until the setting frequency reach or exceeds the certain value Fb. Stop process:...
  • Page 89 All manuals and user guides at all-guides.com V5 series inverter command is input. Fig. Fig. 4-42 4-42 holding holding mode mode after after single single cycle cycle Fig. Fig. 4-42 4-42 PLC PLC holding holding mode mode after after single single cycle cycle Fig.
  • Page 90 All manuals and user guides at all-guides.com V5 series inverter Fig. 4-44 start mode mode 1 1 1 1 Fig. Fig. Fig.4-44 4-44 4-44 PLC PLC start start start mode mode Ten’ ’ ’ ’ s s s s place place place place of of of of LED...
  • Page 91 All manuals and user guides at all-guides.com V5 series inverter 0 0 0 0 :Run Run forward forward forward forward 1 1 1 1 :Run reverse Run reverse reverse reverse 2 2 2 2 :Decided Decided Decided by by by operating operating operating instructions...
  • Page 92 All manuals and user guides at all-guides.com V5 series inverter P9.00 P9.00 P9.00 P9.00 Traverse Traverse Traverse Traverse operation operation operation operation selection selection selection selection Range Range Range Range:0 0 0 0 , , , , 1 1 1 1 0 0 0 0 0 0 0 0 :Disabled Disabled...
  • Page 93 All manuals and user guides at all-guides.com V5 series inverter The calculated length can be corrected through times of length (P9.10) and correction coefficient of length (P9.11), and the corrected length is the actual length. Actual length =calculated length×correction coefficient of length÷correcting coefficient of length When actual length(P9.09)≥preset length(P9.08), the inverter will send out a STOP command to stop.When the inverter restarts, it needs to clear the actual length (P9.09) or modify actual length (P9.09)<...
  • Page 94 All manuals and user guides at all-guides.com V5 series inverter iation iation iation iation Integral Integral adjustment adjustment coefficient coefficient coefficient of of of of speed speed speed Integral Integral adjustment adjustment coefficient speed PA.13 PA.13 Range Range PA.13 PA.13 Range Range:100 100~500...
  • Page 95 All manuals and user guides at all-guides.com V5 series inverter PF.01 PF.01 User User User’ ’ ’ ’ s s s s password password password Range Range 0000 0000 9999 9999 0000 0000 PF.01 PF.01 User password Range Range:0000 0000~9999 9999 0000 0000...
  • Page 96 All manuals and user guides at all-guides.com V5 series inverter 5 5 5 5 Fault Fault Fault Fault Diagnosis Diagnosis Diagnosis Diagnosis and and Countermeasures Countermeasures Countermeasures Countermeasures 5-1. 5-1. Fault Fault diagnosis diagnosis countermeasurs countermeasurs 5-1. 5-1. Fault Fault diagnosis diagnosis and and countermeasurs countermeasurs...
  • Page 97 All manuals and user guides at all-guides.com V5 series inverter Reduce DC injection braking current and prolong braking DC injection braking current is too big time V/F curve is not suitable Adjust V/F curve and torque boost value The rotating motor restarts after stop Set “start of fly”...
  • Page 98 All manuals and user guides at all-guides.com V5 series inverter PROM Press key to reset or seek service E-17 W/R error of control parameter W/R error E-18 Decrease the brake current % DC brake overcurrent Set wrong current of DC brake Main circuit lack Lack of phase when input current, momentary Check the reason and reset...
  • Page 99 All manuals and user guides at all-guides.com V5 series inverter 6 6 6 6 Maint Maint Maint Mainte e e e n n n n an an an ance ce ce ce 6-1. 6-1. Maintenance Maintenance 6-1. 6-1. Maintenance Maintenance Environment effections such as ambient temperature, humidity, fog ,internal component aging and other factors will give rise to the occurrence of potential faults.
  • Page 100 Xinje electronic Co.,Ltd will offer warranty service in the case of the following situations: (1) The warranty clause is only confined to the inverter; (2) We will take the responsibility of 15 months defects liability period for any faults or damages under the normal operation conditions.
  • Page 101 All manuals and user guides at all-guides.com V5 series inverter 7 7 7 7 Communication Communication Communication Communication P P P P rotocol rotocol rotocol rotocol 7-1. 7-1. 7-1. O O O O verview verview verview verview of of of of communication communication communication protocol...
  • Page 102 All manuals and user guides at all-guides.com V5 series inverter (2) The inverter is a master in the network, the slave will not response to the command sent by the inverter via broadcast address. (3) Users can set the inverter’s current address, baud rate and data format by using the inverter’s keypad or through the serialcommunication port.
  • Page 103 All manuals and user guides at all-guides.com V5 series inverter 2 2 2 2 ..Communication Communication Communication Communication address address address address: 00H:broadcast for all the inverters(broadcast) 01H:communicate with the inverter addressed 01 0FH:communicate with the inverter addressed 15 10H:communicate with the inverter addressed 16 By parity of reasoning……….,max can reach 254(FEH)...
  • Page 104 All manuals and user guides at all-guides.com V5 series inverter Data Data CRC CHECK Low CRC CHECK Low CRC CHECK High CRC CHECK High (4) function code 10H: write several data in the register Note: V5/VB5 inverters only support one pack of data write. For example: write P0.06=50.00Hz in inverter address 01H.
  • Page 105 All manuals and user guides at all-guides.com V5 series inverter 2001H Set frequenc command via port 2100H Read inverter’s fault parameter Read inverter’s status BIT0:stop indicate,0:Stop;1:Run BIT1: ,1:low voltage;0:normal BIT2:forward/reverse indicate,1:forward;0:reverse BIT3:jog indicate 1:jog;0: none BIT4:close loop control selection,1:close loop;0: none Monitor inverter’s status BIT5:traverse mode running flag,1:traverse;0:none...
  • Page 106 All manuals and user guides at all-guides.com V5 series inverter 01H,06H,20H,00H,00H,01H,CRC1,CRC2 Definition Definition of of of of fault fault code Definition Definition fault fault code code code: Fault Fault Fault Fault code code code code Instruction Instruction Instruction Instruction Fault function code. Inverter can not find :03H,06H,08H。 Fault data address.
  • Page 107 无锡市信捷科技电子有限公司 Xinje Xinje Electronic Electronic Co., Co., Ltd. Ltd. Xinje Xinje Electronic Electronic Co., Co., Ltd. Ltd. 江苏省无锡市蠡园开发区 4th Floor Building 7,Orignality Industry park, 创意产业园 7 号楼四楼 Liyuan Development Zone, Wuxi City, 邮编: 214072 Jiangsu Province, China 214072 电话: 86-510-85134136 Tel: 86-510-85134136 传真:...

This manual is also suitable for:

Vb5V5