Table of Contents
Advertisement
When selecting a heater power level and the
Minute minder is running, the selected
heater can not be temporised.
Remember it is possible to set the time for
any heater at power level 0.
If no heater is selected, touching the Timer
[+TIMER] or [-TIMER] a beep sounds, the
timer display shows a "00" flashing and the
display unit digit point flashes.
It works exactly like a heater timer. When the
Independent Minute Minder is selected,
touching the Timer [+TIMER] or [-TIMER]
key the independent minute minder is
selected.
The countdown starts 5 seconds after the
last operation over the [+TIMER] or [-TIMER]
key, or any key is touched.
A beep sounds and the timer display digit
stops flashing; the digit unit digit dot however
continues flashing.
Page 24
If any heater is timed then the Minute
Minder cannot be selected.
The Minute minder is selected
Advertisement
Table of Contents
