Controls - Beko HIC 95600 T1 User Manual

Controls

5
Basic functions
The control allows different layout
configurations:
- Control for up to 5 Radiant heaters.
KeyLock function.
Stop & Go function.
Indication of residual heat for each heater.
Thermal control protection.
Protection from accidental activation of
keys:
- One or more keys activated for more than
10 sec. -> Switching off the touch control. A
warning beep sounds every 10 sec., while
the key/s is/are activated.
- With all heaters at zero power during 10
sec. -> The Cooktop is switched off. If the
switching off is due to an accidental
activation of keys, the touch control actuates
as above.
Acoustic warning to attract the user's
attention.
Infrared keys
1 key for switching On/Off the
Cooktop [ON_OFF_KEY].
1 key for locking/unlocking the
keyboard [KEYLOCK_KEY].
1 key for Stop & Go function
[STOP_GO_KEY].
1 key for enabling/disabling
extensions DOUBLE_ZONE_KEY].
2 key for timer timeset [-TIMER_KEY]
[+TIMER_KEY].
5 keys for heater selection
[HEATER_n_KEY] n=0..5
1 Infrared slider key [SLIDER] for
heater cookset selection.
Page 12
Displays and LED's
5 7-segment displays [HEATERn_DISPLAY]
n=1..5 to show the actual set on each
heater,
show heater and cooktop special statuses
and show errors.
2 7-segment displays
TIMER_TENTHS_DISPLAY] and
[TIMER_UNITS_DISPLAY] to show the timer
remaining time.
10 LED-s [HEATERn_ZONE1_LED] and
[HEATERn_ZONE2_LED] n=1..5 for radiant
heater double and triple zone on/off
indication.
1 LED [CHILDLOCK_LED] to show if the
cooktop is locked/unlocked.
1 LED [STOP_GO_LED] to show if the Stop
& Go function
5 LED-s [HEATERn_TIMED_LED]n=1..5 to
show the association between the timer and
the cooking zones.
1 Bargraph LED [BARGRAPH_LED] to show
the selected power for the selected heater.
Sounds
3 beeps for switching Off the Cooktop
[OFF_SOUND].
2 beeps for activating Stop&Go function
[STOP&GO_SOUND].
3 short beeps for indicate a disabled key
[KEYBOARD_ERROR_SOUND].
scrolling sound for power selection on the
slider [SLIDER_SOUND].