Checks Before Installation; Setup - Hoshizaki F-801MAJ-C Instruction Manual

2. Checks Before Installation

1) Remove the shipping carton, tape, and packing material.
2) Check that the refrigerant lines do not rub or touch lines or other surfaces, and that the
fan blades move freely.

3. Setup

1) Assemble 2 sets of legs using the legs, bolts, and nuts provided. See Fig. 9.
2) Position 1 of the plates provided between a set of legs and the remote condenser unit,
then secure the legs to the remote condenser unit with the bolts and nuts provided.
Repeat on the other side with the remaining set of legs.
3) The bottom of each leg has a mounting hole. Secure the legs to the permanent site with
4 bolts (not included).
Bolt with Split Lock
Washer and Flat Washer
Nut
Plate
Nut
Leg
Fig. 9
27
Bolt with Split Lock
Washer and Flat Washer