Nokia RM-340 Service Manual page 30

Page 2 –10
PKD-1
SW security device is a piece of hardware enabling the use of the
service software when connected to the parallel (LPT) port of the PC.
Without the device, it is not possible to use the service software.
Printer or any such device can be connected to the PC through the
device if needed.
RJ-200
The jig is used for soldering and as a rework jig for the system module.
It is made of lead-free rework compatible material.
RJ-51
To be used with ST-30!
RJ-72
To be used with rework stencil ST-32.
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Service Devices and Service Concepts
SW security device
Soldering jig
Rework jig
Rework jig
RM-340; RM-341
Issue 1