Clover DV1670 Instruction Manual page 70

Chapter 9. Systems Section In-Depth
You will see Figure 60 ID selector screen. Your ID selector screen should appear with DVR ID: 01 in our
example (figure shows 00) and you must use the directional button on the remote to configure larger
number ID field to 01 as well.
Now you will have the ability to use that remote controller to operate this particular DVR unit.
Also you may use two remote for two spate DVR let's say you configure one remote to last sync with
DVR ID of 01 and use the other remote only for DVR ID of 00 then these two remote now has different
ID. Our remote controller has micro controller built in and it remembers the last ID that it was assigned.
Therefore, our remote controllers have capability to be assigned ID numbers as well as DVR having spate
ID numbers for remote controller.
Page 70
Figure 60 ID selector screen
Tow DVR with one remote
controller
Tow DVR with two remote
controller
1. INFORMATION GUI
These two IDs
must match
each other