Clover DV1670 Instruction Manual page 33

Chapter 2. Hardware Description
EIA/TIA E568B Configuration
Signal Type
LAN Tx+
LAN Tx-
LAN Rx+
Not Used
Not Used
LAN Rx-
Not Used
Not Used
Example 1. Direct connection using cross over cable
This type of connection is used mostly for testing the DVR unit and for simple and short cable
connection. Since there is no devices providing DHCP services you must fix your IP address to static IP
address (discussed on Chapter Chapter 11. Network Section In-Depth from page 105) to your DVR as
well as your PC. If this is not done properly, then there connectivity of the unit to the PC will not happen.
3. Rear Port Specification and Connection Examples
Figure 20 Ethernet Cable Color Code
Pin Number
1
2
3
4
5
6
7
8
Figure 21 Ethernet Pin Configuration
Description
Ethernet Transmit Positive
Ethernet Transmit Negative
Ethernet Receive Positive
Not Used
Not Used
Ethernet Receive Negative
Not Used
Not Used
Page 33