Honda Ridgeline 2022 Owner's Manual page 66

uuChild SafetyuSafety of Infants and Small Children
■
Installing a LATCH-Compatible Child Seat
A LATCH-compatible child seat can be installed in any of the three rear seating
positions. A child seat is attached to the lower anchors with either the rigid or
flexible type of connectors.
Marks
Center position
Upper Guide
Center Tether Anchor Point
64
1. Locate the lower anchors under the marks.
2. Make sure there are no objects near the
anchors that could prevent a secure
connection between the child seat and the
anchors.
Center position
3. Lower the head restraint to its lowest
position.
4. Lift the upper guide cover, then route the
tether strap around the upper guide.
5. Route the tether strap downward properly,
then attach the strap hook to the center
tether anchor.
u
Making sure the strap is not twisted.
1Installing a LATCH-Compatible Child Seat
3
WARNING
Never attach two child seats to the same
anchor. In a collision, one anchor may not
be strong enough to hold two child seat
attachments and may break, causing
serious injury or death.
For your child's safety, when using a child seat
installed using the LATCH system, make sure that the
child seat is properly secured to the vehicle. A child
seat that is not properly secured will not adequately
protect a child in a crash and may cause injury to the
child or other vehicle occupants.