Honda Ridgeline 2022 Owner's Manual page 399

■
Shift Operation
Shift Button
Indicator
Tachometer's Red Zone
M (sequential mode) Indicator
Sequential Mode Gear Selection
Indicator
Shift Position Indicator
(Transmission System Indicator)
Press the button.
( P
Pull back the button.
( R
Press the button.
( N
Press the button.
D/S
Each time you press the button,
the mode switches between Drive
and S Position mode.
Continued
uuWhen DrivinguShifting
1Shift Operation
NOTICE
( D ( R
When you change to and vice versa, depress
the brake pedal to come to a complete stop, then
select the intended shift position while maintaining
brake pressure.
Use the shift position indicator and the shift button
indicator to check the shift position before selecting a
shift button.
If the indicator of the currently selected shift position,
or all the shift position indicators are blinking
simultaneously, there is a problem with the
transmission.
Avoid sudden acceleration and have the transmission
checked by a dealer as soon as possible.
The fuel supply may be cut off if you drive at engine
speeds in or over the tachometer's red zone (engine
speed limit). If this happens, you may experience a
slight jolt.
When the engine speed is increased while the
( N ( P R (
transmission is in , or
be cut off even without the engine speed entering
the tachometer's red zone.
When shifting positions in extremely low
temperatures (-22°F/-30°C), there may be a short
delay before the shift position is indicated in the
display. Always confirm you are in the correct shift
position before driving.
, the fuel supply may
397