uuIndicatorsuMulti-Information Display Warning and Information Messages
Message
Flashes when the system senses a likely collision with a
●
vehicle in front of you. The beeper sounds.
Appears when ACC has been automatically canceled.
●
Appears when the speed of the vehicle is too high for
●
you to set ACC.
Appears when the speed of the vehicle is too low for
●
you to set ACC.
Appears when ACC is canceled due to excessive high
●
vehicle speed.
Appears when ACC is canceled due to excessive low
●
vehicle speed.
102
Condition
Explanation
Take appropriate action to prevent a collision (apply the
●
brakes, change lanes, etc.)
2 Collision Mitigation Braking System
P. 426
2 Adaptive Cruise Control (ACC) P. 438
You can resume the set speed after the condition that
●
caused ACC to cancel improves. Press the RES/+
button.
2 Adaptive Cruise Control (ACC) P. 438
Reduce the speed, then set ACC.
●
2 Adaptive Cruise Control (ACC) P. 438
Raise the speed, then set ACC.
●
2 Adaptive Cruise Control (ACC) P. 438
Reduce the speed, then reset ACC.
●
2 Adaptive Cruise Control (ACC) P. 438
Raise the speed, then reset ACC.
●
2 Adaptive Cruise Control (ACC) P. 438
TM
(CMBS
TM
)