EAW QX Series Application Manual page 55

Passive Point Source
Connect Cabinet & Suspension Bracket to Top MKD1000
4. Line up holes on top MKD1000 with Cabinet Bracket rear point/splay angle, and
Suspension Bracket as suggested by Resolution 2 software.
5. Secure in place using supplied hardware screws (Figure 4)
Note: Using two people, carefully alternate MKD1000 to other side and follow above
steps to complete the array.
Suspend MKD Array
6. Using pick point designated by Resolution 2, attach shackle to two points. This
may either be two points on the Suspension Bracket (Figure 5), or two points on
the Cabinet Bracket (more information on Cabinet Bracket configuration later in this
document)
Application Guide
Figure 4 - Suspension & Cabinet Bracket secured
Tel 800 992 5013 / +1 508 234 6158
|
www.eaw.com
55