Set The Vcr1 Channel - RCA P52811 User Manual

Interactive Setup

Set the VCR1 Channel

The next step lets you set the VCR1 channel. When you set the
VCR1 channel, you're telling the TV what channel to tune to
when you press the VCR1 button on the remote.
For example, if you have a VCR connected to the Video 1 input
jacks on the back of the TV, you want the TV to tune to the
Video 1 input channel when you press the VCR1 button. If you
don't have a VCR1 component connected to the TV, skip this step
or select Not Connected from the VCR1 Channel choice list. (For
more, see Auto Tuning in the Quick Reference section.)
SETUP
Would you like to use a VCR
with your TV?
1 Use TV with a VCR
2 Skip this step
1. Press MENU to bring up the VCR1 choice list.
SET VCR1 CHANNEL
1 Not connected
2 Channel 3
3 Channel 4
4 Video 1 Input
5 Video 2 Input
2. Point to the choice that matches the way you have your VCR
connected to the TV.
If you used the Connections Foldout to hook up your TV, use
the table shown at the right to select the VCR1 channel.
3. Press MENU to continue.
If you used Select
Connection A Video 1 Input
Connection B Video 1 Input
Connection C Video 1 Input
Connection D Video 1 Input
Connection E Not Connected
Connection F Not Connected
Connection G Video 2 Input
Connection H Channel 3*
Connection I Video 2 Input
* Or Channel 4, depending on how
your VCR's 3/4 switch is set.
19