Table of Contents
Advertisement
Using the CMPT Jack
Connect a component, such as a VCR, DVD player or Satellite Receiver, to the TV using the
CMPT jacks. Connect Component cables to the Y Pb Pr VIDEO IN jacks on the bottom panel of
the TV and to the Component Out jacks on the component. Then connect audio cables to the
CMPT AUDIO IN jacks (R and L) on the bottom panel of the TV and to the Audio Output jacks
on the component.
Note: The CMPT input also accepts Y Cr Cb signals. Your TV will automatically adjust to
that type of signal.
Using the RGB Jack
Connect a component, such as a DVD player or digital cable box, to the TV using the RGB
jack. Connect one end of a 15 pin D-sub cable to the RGB jack on the bottom of the TV and
the other end to the RGB out jack on the component. Then connect the supplied 3.5mm mini
phone to audio cable adapter to the RGB AUDIO IN jack on the bottom of the TV. Connect
audio cables to the adapter and connect the other end to the Audio Output jacks on the
component.
Chapter 1
Pr
Pb
Y
R
AUDIO
L/
VIDEO IN
Mono
IN
CMPT
AV component
Graphics contained within this publication are for representation only.
Connections & Setup
AUDIO
IN
RGB
AV component
7
Advertisement
Table of Contents
