Sound Menu - RCA LCDX2722W User Manual

Using the Menu System
Adv. Picture Settings
Black Level
Backlight Adjust
Comb Filter
Film Mode
Noise Reduction
Zoom Mode
Press </> to select. Press MENU to go to Picture Menu.
Sound
Volume
Treble
Bass
Balance
Sound Type
SRS TruSurround XT
Auto Volume Level
Audio Output
Press </> to adjust. Press MENU to go to Main Menu.
30
0 IRE. . .
Normal. . .
Level 1. . .
4:3
Mono. . .
Fixed. . .
Graphics contained within this publication are for representation only.
Advanced Picture Settings
Black Level Adjusts the amount of light the picture emits for the
darkest areas of an image. Select 0 IRE when the dark colors
appear too dark; select 7.5 IRE to enhance the dark contrast in the
picture.
Backlight Adjust Press the right arrow button to scroll through
the adjustments to the TV screen, depending on room lighting:
Soft; Normal; and Bright.
Comb Filter Separates the chrominance from the luminance to
produce a more accurate color. If a component is connected to the
TV using the composite video or S-Video and the picture lacks
detail, turn on (box has check mark).
Film Mode (Also known as 3:2 Reverse Pulldown) Detects and
converts film content for better display with minimal artifacts. If
you're watching a movie, turn on (box has check mark).
Noise Reduction Reduces the picture "static" or any type of
interference. Select None if the signal is clear; Level 1 if the signal
has minimal static; Level 2 if the signal has some static; and Level 3
if the signal has a lot of static.
Zoom Mode Allows you to change how the image of a 4:3
picture is displayed on your 16:9 screen: 4:3, Zoom 14:9, Zoom
16:9, Cinerama, and 16:9 Widescreen.
Note: Zoom Mode options vary for DVI and RGB inputs.

Sound Menu

The Sound menu lets you adjust audio output. To access the Sound
menu, press MENU on the remote, and then select Sound from the
main menu.
Volume Increases or decreases the volume coming from the TV's
speakers.
Treble Increases or decreases the treble.
Bass Increases or decreases the bass.
Balance Press the right arrow button to increase the audio output in
the right speaker; press the left arrow button to increase the audio
output in the left speaker.
Sound Type Press the right arrow button to scroll through the
available audio types, which control the way the sound comes through
your speakers: Mono, Stereo, and SAP (Second Audio Program)
Mono plays the sound in mono only. Use this setting when
receiving broadcasts with weak stereo signals.
Use Stereo to split the incoming stereo audio signal into left and
right channels. Most TV programs and recorded materials have
stereo audio.
SAP plays the program's audio in a second language, if one is
available. SAP audio is broadcast in mono. SAP is also used to
broadcast a program's audio with descriptions of the video for the
visually impaired.
Note: SAP is not available for video input channels.
Chapter 4