Daikin FTXM42K3V1B Operation Manual page 37

Hide thumbs Also See for FTXM42K3V1B:
Table of Contents

Advertisement

Hot air does not flow out soon after
the start of HEAT operation.
• The air conditioner is warming up. You should wait for
1 to 4 minutes. (The system is designed to start
discharging air only after it has reached a certain
temperature.)
The ON/OFF TIMER does not
operate according to the settings.
• Check if the ON/OFF TIMER and the WEEKLY TIMER
are set to the same time.
Change or deactivate the settings in the WEEKLY
TIMER.
Page 23
Remote controller does not work
properly.
No remote controller signals are displayed.
The remote controller sensitivity is low.
The display is low in contrast or blacked out.
The display runs out of control.
• The batteries are dying and the remote controller is
malfunctioning. Replace all the batteries with new, size
AAA.LR03 (alkaline). For details, refer to set the
batteries of this manual.
Page 9
The outdoor fan rotates while the
air conditioner is not in operation.
After operation is stopped
• The outdoor fan continues rotating for another
60 seconds for system protection.
While the air conditioner is not in operation
• When the outdoor temperature is very high, the
outdoor fan starts rotating for system protection.
The indoor unit gives out odour.
• This happens when smells of the room, furniture, or
cigarettes are absorbed into the unit and discharged
with the airflow.
( If this happens, we recommend you to have the
indoor unit washed by a technician. Consult the
service shop where you bought the air conditioner.)
HEAT operation cannot be selected,
even though the unit is heat pump
model.
• Check that the jumper (J8) has not been cut. If it has
been cut, contact the service shop.
Jumper (J8)
36

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ftxm35k3v1bFtxm50k3v1b

Table of Contents