Choosing An Audio Processor - RCA F35674 User Manual

Advanced Features

Choosing an Audio Processor

Changing the audio processor changes the way your TV sounds.
There are two ways to change the audio processor: a) from the
Audio menu, and b) by pressing SOUND on the remote. For
more, see Audio menu in the Quick Reference section.
Choosing an audio processor from the Audio menu
1. Press MENU to bring up the Main menu.
2. Press MENU again to select the Audio menu.
3. Point to Audio Processor and press MENU. The Audio
Processor choice list comes up, with the current mode
highlighted.
4. Point to an audio processor mode and press MENU to select it
and return to the Audio menu. The options are:
Mono Plays the sound in mono only.
Stereo Splits the incoming stereo audio signal into left and
right channels.
Second Audio Program (SAP) Plays the program's audio in
a second language, if one is available. Setting the audio
processor to SAP tells the TV to play the program's audio in
this second language, if one is available.
Choosing an audio processor from the remote
1. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press CLEAR
to exit.
60
SOUND
The number of audio processor
choices available depends on the type
of signal you are currently using. For
example, depending on the way you
have your VCR connected to the TV,
the number of choices is greater
when you are watching TV than
when you are watching a video tape.