Table of Contents
Advertisement
APPENDIX A: USING CONNECTION D
TV and (2) VCRs
(Connection D)
This information applies to Connection D in the Connections
Foldout.
Connection D provides:
•
stereo sound from broadcast programs
•
stereo sound from VCR
•
Picture in Picture (PIP)
•
watch one channel on TV while recording another channel
•
record from one VCR to the other
To use this connection you must have:
•
(3) coaxial cable
•
(6) audio/video cables
•
(1) S-Video cable (optional)
To connect:
1. Connect cables as shown in Connection D.
2. Return to First Things First, then follow the steps in the
Interactive Setup.
Using Connection D
To watch TV programs:
1. Turn VCR off.
2. Press TV and tune to a channel.
To record one program and watch another:
1. Turn VCR2 off.
2. Press VCR1 and tune to a channel.
3. Begin recording.
4. Make sure the TV/VCR switch on the VCR1 is set to TV.
5. Press TV and tune to a channel.
To play a tape on the VCR:
1. Press VCR1.
2. Press PLAY.
You can record from one tape
to another (tape dubbing):
1. Insert original tape into VCR2.
2. Insert blank tape into VCR1.
3. Press VCR1.
4. Set VCR to line input (for more, see
your VCR User Manual).
5. Press RECORD to begin recording.
6. Press DVD•VCR2, then press PLAY.
7. If you want to watch a different
channel, set both the TV/VCR
switch on both VCRs to TV; press
TV; then tune to a channel.
Note: The unauthorized recording
of satellite broadcasts, television
programs, or other copyrighted
materials may infringe the rights
of others.
CABLE, CABLE BOX, OR ANTENNA
VCR 1
OUT
IN
VIDEO
R
L
VIDEO
R
S-VIDEO
VCR 2
OUT
VIDEO
R
TV
VIDEO
VIDEO
R
INPUT 1
INPUT 2
L mono
R
R
VCR
CONTROL
L mono
L
S-VIDEO
AUDIO
OUTPUT
See Connections Foldout,
Connection D
IN FROM ANT
CH3
CH4
L
OUT TO TV
IN FROM ANT
CH3
CH4
L
OUT TO TV
CABLE/
ANTENNA
69
Advertisement
Table of Contents
