Choosing An Audio Processor; Choosing An Audio Processor From The Remote; Signal - RCA P50830 User Manual

CHOOSING AN AUDIO PROCESSOR
Changing the audio processor changes the way your TV sounds.
There are two ways to change the audio processor: a) from the
Audio menu, and b) by pressing SOUND on the remote. For
more, see Audio menu in the Quick Reference section.
Choosing an audio processor from the Audio menu
1. Press MENU to bring up the Main menu.
2. Press MENU again to select the Audio menu.
.
Point to Audio Processor and press MENU. The Audio
Processor choice list comes up, with the current mode
highlighted.
.
Point to an audio processor mode and press MENU to select it
and return to the Audio menu. The options are:
Mono Plays the sound in mono 0nly.
Stereo Splits the incoming stereo audio signal into left and
right channels.
SRS Stereo (-) SRS* is an audio processing technology that
adds greater depth and stereo separation to stereo audio
signals.
Enhanced (,) SRS Stereo Enhances the SRSsignal to give
the impression of even greater depth and stereo separation.
Sound Logic Stereo Sound Logic monitors a program's
audio track and limits the volume to a minimum and
maximum volume range. Whenever you adjust the volume on
the TV, the minimum and maximum volume range adjusts, too.
Second Audio Program (SAP) Plays the program's audio in
a second language, if one is available. Setting the audio
processor to SAP tells the TV to play the program's audio in
this second language, if one is available.
Choosing an audio processor from the remote
1. Press SOUND to display the audio processor choice list.
2. Point to and select a different audio processor or press CLEAR
to exit.
* SRS,Sound Retrieval System, and the SRSlogo are registered
trademarks of SRS Labs,
Inc.
6O