Table of Contents
Advertisement
Water hardness
In order to achieve good dishwashing results, the dishwasher needs soft water (water with low mineral
content). Hard water leaves a white coating on dishes and the dishwasher.
Checking water hardness
Contact the local water utility to check the water hardness in your area. This is important with regard
to how much detergent and rinse aid to use.
Basic settings
Press
.
"Welcome to your ASKO. First time setup." is shown on the display. It is important that you choose
the right settings to ensure good dishwashing results.
Select setting with
Settings
1.
Language
2.
Set level of rinse aid
0/1/2/3/4/5
Pre-selected at factory: 4
3.
TAB On/Off
Pre-selected at factory: Off
To change the chosen setting, see the chapter Settings.
Before washing for the first time
. Confirm selected setting with
Select the language to be shown on the display.
By using rinse aid you will improve your drying result. You
will also achieve a better dishwashing result with glassware
and dishes.
The rinse aid dispenser can be adjusted between 0 (Off)
and 5 (High dose).
Activate this setting when using an all-in-one detergent that
contains rinse aid.
This setting reduces the rinse aid dose.
.
7
Advertisement
Table of Contents
