Advertisement
Speci cations
If any of the following are indicated, the smart clamp
turns protection on.
LED Indicator
The red light is
always on
The green light
ashes slowly
Speci cations
Model
Capacity
Ingress Protection
Micro USB input
Torch
Type-C input & output
8
Situations
1. Battery clamp is reverse connected.
-Check if the battery clamps are
reverse connected.
2. The clamp has short-circuited.
-Check whether the two clamps are
connected together or both clamps
are connected to the same metallic/
conductive surface.
3. The temperature of the clamp exceeds
65(+/-5) degrees.
-Remove the clamp until the red/green
light ash
The voltage of the jump starter is too low.
Charge the jump starter before
attempting to re-use.
JSP1200
59.2Wh
IP66
5V/2.1A
1W LED, 100 lumens
(PD30W)
5V/3A,9V/3A,12V/2.5A,
20V/1.5A, (QC18W) 5V/3A,
9V/2A, 12V/1.5A
Advertisement
