Package Contents; Getting Started - Oricom JSP1200 Operating Instructions Manual

Package Contents

1 x JSP1200 Jump Starter
1 x Smart Battery Clamp
1 x USB-C to USB A Cable
1 x USB-C to USB C Cable

Getting Started

Charging the Jump Starter
1. Connect the jump starter to the power source via the
supplied USB-C cable, Type-A Micro USB cable or AC
Charger. Once it is fully charged, all 4 battery level indicator
lights will be on.
2. Unplug the cable when charging is complete.
NOTE:
When using the product for the rst time, please make sure that
the jump starter is fully charged.
Charging Your Devices
1. Connect your devices, including; smartphone, tablet or
other electronic devices via USB cable.
2. Disconnect the USB cable when charging is complete.
LED Torch
Press and hold the ON/OFF button for 3 seconds to turn
on the torch. Press the ON/OFF button brie y to switch the
modes between Solid, SOS, and Flash. Press and hold the
ON/OFF button for 3 seconds to turn off the LED light.
Package Contents / Getting Started
1 x 12V Car charger
1 x AC Charger
1 x User Manual
1 x Carry Pouch
5