Table of Contents
Advertisement
Connecting Your TV
Cable-TV Connections
Follow one of these steps to connect a cable-TV system to your TV instead of a home antenna. Since cable-TV systems
vary, you may wish to consult your local cable-TV company for additional information.
A
Follow this diagram if your cable company does not require a cable box (no scrambled channels):
Incoming
Cable
B
Follow this diagram if your cable company requires a cable box that can be controlled by remote control:
Incoming
Cable
C
Follow this diagram if your cable company requires a cable box that cannot be controlled by remote control:
Incoming
Cable
Note: These optional accessories (2-way
splitter
, A/B switch
A
cables
) are available as a kit under
C
#AH041BL.*
The "A" position on the A/B switch lets you select all
non-scrambled channels by the TV's remote.
* Optional accessories are available from most dealers or electronics supply stores.
IN
C
A
, and three coaxial
B
IN
Remember to tune your TV to the
output channel of the cable box (usually
2, 3, or 4) when selecting channels via
the cable box.
OUT
CABLE BOX
C
C
OUT
CABLE BOX
The "B" position allows you to select scrambled channels
via the cable box. Remember to tune your TV to the
output channel of the cable box (usually 2, 3, or 4)
when selecting channels via the cable box.
A
B
B
ANTENNA
Back
of
TV
ANTENNA
Back
of
TV
ANTENNA
Back
of
TV
17
Advertisement
Table of Contents
