GE Profile OPAL 2.0 Owner's Manual page 2
Hide thumbs
Also See for Profile OPAL 2.0:
- Owner's manual (56 pages) ,
- Owner's manual (56 pages) ,
- Owner's manual (60 pages)
Table of Contents
Advertisement
Available languages
Available languages
™
THANK YOU FOR MAKING GE APPLIANCES A PART OF YOUR HOME.
Whether you grew up with GE Appliances, or this is your first, we're happy to have you in the family.
We take pride in the craftsmanship, innovation and design that goes into every GE Appliances
product, and we think you will too. Among other things, registration of your appliance ensures that we
can deliver important product information and warranty details when you need them.
The Good Ice™
2
49-9000029 Rev. 6
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the Profile OPAL 2.0 and is the answer not in the manual?
Questions and answers
How can I replace the tubes?
What does the blinking "Cleaning" light indicate during normal usage?
The blinking "Cleaning" light on the GE Profile OPAL 2.0 indicates that the unit requires cleaning.
This answer is automatically generated
I cleaned it but now water want go from side tank to ice maker
Water may not be flowing from the side tank to the GE Profile OPAL 2.0 ice maker due to one or more of the following reasons:
1. Incorrect Tube Connection: The tube labeled "Tube B" (marked "Side Tank") must be properly connected. If it's not correctly attached, water will not flow.
2. Air in the Line: If air is trapped in the tube, it can block water flow. Ensuring a proper seal and priming the line may help.
3. Water Not Drained First: If there's water already in the internal reservoir, the system may not draw from the side tank until the main reservoir level drops.
4. Side Tank Not Installed Properly: The tank must be seated correctly and connected tightly to ensure proper flow.
5. Clog or Debris: Blockages in the tube or connection point may stop water flow.
6. Ice Maker Turned Off: The ice maker should be turned off during setup and then turned back on once the side tank is connected.
Check all connections, ensure the tank is full and seated properly, and make sure the tubing is clear and correctly attached.
This answer is automatically generated