Volvo XC40 2020 Owner's Manual page 432

Hide thumbs Also See for XC40 2020:
Table of Contents

Advertisement

STARTING AND DRIVING
Start/stop function
With the start/stop function, the engine
switches off temporarily when the car has
stopped e.g. at traffic lights or in a traffic
queue, and then starts again when it is nee-
ded.
The start/stop function reduces fuel consump-
tion, which in turn contributes to reduced
exhaust emissions.
The system makes it possible to adopt an
environmentally-conscious driving style by
allowing the car to engine auto-stop when
possible.
Related information
Driving with start/stop function (p. 430)
Conditions for the Start/Stop function
(p. 432)
Drive modes* (p. 424)
430
Driving with start/stop function
The start/stop function temporarily switches
off the engine when stationary and then
starts it automatically when required.
The Start/Stop function is available when the
car is started and can be activated if certain
conditions have been met.
The driver display indicates when the function
is
available
active
not available.
All of the car's normal systems such as light-
ing, radio, etc. work normally, even when the
engine is auto-stopped. However some equip-
ment may have its output temporarily reduced
e.g. the climate control system's fan speed or
extremely high volume on the audio system.
Auto-stop
The following is required for the engine to
auto-stop:
With automatic gearbox
Stop the car with the foot brake and then
keep your foot on the brake pedal - the
engine stops automatically.
With manual gearbox
Declutch, set the gear lever in neutral
position and release the clutch pedal - the
engine stops automatically.
In drive mode
Comfort
or
Eco
, the engine
may auto-stop before the car is completely
stationary.
With adaptive cruise control or Pilot Assist
activated, the engine auto-stops approxi-
mately 3 seconds after the car has stopped.
Autostart
The following is required for the engine to
auto-start:
* Option/accessory.

Advertisement

Table of Contents
loading

Table of Contents