Tv/Dvd + Vcr - RCA 20F610TD User Manual

Connections & Setup

TV/DVD + VCR

1. Connect your TV/DVD to your VCR.
A. Connect the audio (white and red) cables to the VIDEO 1 R and L/MONO AUDIO jacks on the back
of the TV/DVD and to the Audio Output jacks on the VCR.
B. If your VCR has an S-Video jack, connect an S-Video cable to the S-Video jack on the VCR and to
the S-VIDEO IN jack on the back of the TV. If your VCR doesn't have an S-Video jack, go to C.
C. Connect a video cable (yellow) to the Video Output Jack on the VCR and to the VIDEO 1 VIDEO
jack on the back of the TV/DVD.
D. Connect a coaxial cable to the TV ANT jack on your TV/DVD and to the Output Jack on your VCR
(sometimes labeled OUT TO TV).
Note: If your VCR has A/V output jacks, you can connect your TV to your VCR using audio/video cables for
better quality.
2. Make sure cable or antenna is connected to your VCR.
Connect the coaxial cable from your cable outlet or antenna to the antenna input on the VCR.
4
Graphics contained within this publication are for representation only.
TV (back panel)
R
R AUDIO
TV ANT
R L/MONO
AUDIO
1D
1A
VCR
OUT TO TV
OUT
IN FROM ANT
R L VIDEO
2
From Cable
or Antenna
-OR-
L VIDEO
L/MONO VIDEO
DIGITAL
VIDEO S-VIDEO IN
1C
1B
CH3
CH4
S-VIDEO
Go to page 7
Chapter 1